Tanfoglio StockII

[Ten2six]

While at the range today I had two fte's in a row so I knew immediately something was wrong. I put it away and finished shooting with my 1076 ( still love that one) not wanting to have a wasted range day.
Later, after closer examination I found that the hook on the extractor had broken off. Anyone else had this problem? I emailed tanfoglio and will see what they do. It is only 10 months old.
This pistol has been absolutely flawless up until now.

[sqlbullet]

None of the custom shops sell an aftermarket one, so it doesn't appear to be a part that commonly fails.  I will be a little shocked if EAA does much for you, but they are only $13, and very easy to change.  PUnch the roll pin far enough out to release the broken one, replace it and pound the pin back in.

[Ten2six]

Thanks sqlbullet, I was hoping you would reply and I figured that was what I would end up having to do.

[DenStinett]

By any chance, did you drop the Slide on a Round loaded in the Chamber ?
Many say that could cause this
It's never happened to me, but I have heard that it does

From a Guy I think we've all heard of:
https://www.youtube.com/watch?v=E4O6Fff8Jz8

[Ten2six]

No, it was somewhere around the 9th or 10th round when it failed. I loaded it up just like I always do, slide open...insert mag..... release slide.

[Ten2six]

While I'm waiting for parts to get I guess I'll have try out this new addition. P Match 10mm

Sent from my Pixel 3 using Tapatalk

[Intercooler]

Never touched or had any break on my fleet. I have only had sights break on mine over the years.

[Ten2six]

I talked to a guy at Hennings and he said he has had it happen. When he was shooting competitively he would replace his every 5000 rounds. Still doesn't explain a failure at well under 2000 rounds. I'm not complaining,it happens and I like the new P match. It's light weight makes it pretty snappy. Very accurate also.
The new extractor is waiting for me at home, hopefully I can get it replaced over Thanksgiving.

[sclark21]

I got to hold a new Poly Match a few weeks ago and thought it felt great in-hand. Good to know she's a shooter too.

[The_Shadow]

While I'm waiting for parts to get I guess I'll have try out this new addition. P Match 10mm

Sent from my Pixel 3 using Tapatalk

Very nice looking pistol!  Cool!

[Ten2six]

The new extractor worked perfectly, no tuning required. You got to love that!