135 gr nosler jhp

Started by Paul James, November 19 2019 07:16:04 PM MST

Previous topic - Next topic

Paul James

I have a few thousand 135 gr nosler jhp for the .400 Corbon any loads for the 10mm you guys want to share?
Powder on hand blue dot, #7 , #9, and 2400.

Kenk

Whatever Underwood uses for their 135's, they are some bad a#^ rd's, not to mention a blast to shoot

Ken

The_Shadow

The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

Trapper6L

By what Shadow posted, the Power Pistol data from the pull down at 11.6 grs is about a full grain passed max per Alliant data posted in the second link. When I first go my 10mm I loaded up a bunch of different loads using the Rainier 135 gr plated bullet. About the only thing good that came from that experience is the gun never failed to go off. Not sure you could have hit your truck at 50 yds but the gun went off. That's a plated bullet which may or may not be the issue. I just got a bunch of 135gr HST bullets so the quest will be on again for a light but nuclear load. I'll be looking for a load to shoot jack rabbits out to 50 yds. I guess I've run out of fun killing those critters considering I've used everything from a 22 short to a 350gr HP out of a 458 Win Mag. Not much to have to pick up after the Mark X 458 went off. A 90gr HP out of a 270 pushed to light speed will also disassemble one. They eat grass, spread disease, and carry disease ridden fleas and ticks. We've had a few cases of the dreaded zombie deer disease in the area and that's the Wildlife Dept recommendation- kill as many jacks as you can. Same warning about feral hogs.

Paul James


Kenk

Hey Trapper, Our DNR in Minnesota has seen some cases of Chronic Wasting Disease (CWD) over the last few years, and is keeping a close eye on it. If jacks and hogs are the main carrier in your area, you have your work cut out for you...Now go get you some 😄
Have a Blessed Thanksgiving

Ken

slam45

10.5g of long shot works well for me with this bullet... 1453f/s easy to control and accurate,, G20 w/KKM barrel... you could load it hotter, but i don't see much need....