Need Quick Loads info for 45ACP +P

[The_Shadow]

Anyone have the Quick Loads program that can crunch some data?  I am looking for a screen shot if possible for 45ACP +P using Alliant BE-86 powder.
Wanting to see the pressure and velocity data points using 7.0 grains & 7.2 grains of BE-86 under the Speer 230 grain Gold Dot, COL 1.22" using CCI300 primer in Starline 45ACP +P brass.
The program may or may not have data points for these specific but sort of hoping someone would plug in the values if possible.
Pressure MAP for the 45ACP +P is 23,000 PSI.

Thanks in advance guys!

[The_Shadow]

Bumping...Quickloads Program?
I am studying to see if Alliant BE-86 powder is in the database, I looking to see if loads with BE-86 with 7.0 grains or 7.2 grains with the 230 grain Gold Dot COL 1.22" CCI 300 primers, using the Starline 45ACP +P brass shows for pressure and velocity.
Looking to see if someone has the Quick Loads Program to plug in the data points, to see where BE-86 powder crosses the 23,000 PSI Plus Pressure mark with this combination if possible!
If possible please post a screen shot of these combinations, it would be greatly appreciated. Thanks

[Pctechdude]

BE-86 is not in the database yet shadow, I have version 3.9 and nothing yet. I was disappointed to find it wasn't in there

[The_Shadow]

Thanks for looking Pctechdude...  Ever since Alliant in their infinite wisdom quit posting pressure values for their data it has been disappointing.
800X is another that's not in the QL data base either...