Guns you've wanted to happen but didnt

[blaster]

a modern high capacity pistol chambered in 7.62x25. and a carbine also chambered for 7.62x25.

[Ray F.]

10mm Magnum anything.   

[spaniel]

• Taurus Judge/28 gauge "The Congressman

http://www.gunsholstersandgear.com/taurus-raging-judge-28-gauge-revolver/

We came so, SO close.  The Judge is a joke but I would have bought a Raging Judge.

There is a Raging Judge. It's a 454 Casull and 410. My brother has one.


I cant believe I'm not alone wanting the 10mm Ruger P90.[/list]

Perhaps they re-used the name once the 28 gauge version became non-viable.  As you can see from the links above, this was the name applied to the 28 gauge version at the time it was displayed at SHOT.

[TXCOONDOG]

All the ones I wanted happened (Ruger 1911 and XDm).

I wouldn't mind a M&P 10mm.

[tommy.duncan]

H&K 10MM
FNX Tactical in 10MM
P227 sized 10MM
M&P 10mm
Ruger Commander Sized 10mm
Glock 36 sized 10mm
Springfied XD-S 10mm
Beretta 96 in 10mm

How is that for starters?

I would say one of those mini Kahrs... but that might really suck to shoot!!

[Pumpkinheaver]

I would love to see a Marlin in .348 Winchester.

[sqlbullet]

H&K 10MM
FNX Tactical in 10MM
P227 sized 10MM
M&P 10mm
Ruger Commander Sized 10mm
Glock 36 sized 10mm
Springfied XD-S 10mm
Beretta 96 in 10mm

How is that for starters?

I would say one of those mini Kahrs... but that might really suck to shoot!!

The three in bold I am behind!  I would take a 1911 commander from Springfield Armory too.

I handled an FNX-45 at a gun show recently and was impressed with the size of the package.  And couldn't help but think an FNX-10mm would be pretty nice.

[tommy.duncan]

H&K 10MM
FNX Tactical in 10MM
P227 sized 10MM
M&P 10mm
Ruger Commander Sized 10mm
Glock 36 sized 10mm
Springfied XD-S 10mm
Beretta 96 in 10mm

How is that for starters?

I would say one of those mini Kahrs... but that might really suck to shoot!!

The three in bold I am behind!  I would take a 1911 commander from Springfield Armory too.

I handled an FNX-45 at a gun show recently and was impressed with the size of the package.  And couldn't help but think an FNX-10mm would be pretty nice.

I would take a Springfield Armory Commander 1911 too. I have a Ruger SR1911 and it is awesome, and
less expensive then what Springfield has released yet.

[sqlbullet]

And, the Ruger SR1911's in 10mm have had rock solid reliability reports.  The Springfield TRP's...not so much.

I would still take a Springfield Commander 10mm, ideally with an aluminum frame, but would prefer one from Ruger.

And, yes, I know that a 10mm would chew up an aluminum frame.  I have plenty of 10mm's to shoot.  This gun would be 95% carry, with only enough full power rounds fired to ensure reliability.

[Overkill338]

Has Ruger ever built something non-reliable ? My P93 9mm , I think you could cramp rocks in the magazine and it would feed them lol

[inv136]

The VLTOR Bren Ten 10mm. A modern version of the Dornaus & Dixon Bren Ten, but, built with superior metallurgy and machining technology. VLTOR dropped the ball and screwed over all of the people that had been following the development from the Fortis to the Bren Ten name as well as the reported news from VLTOR that they were machining the frames and preparing to go into full production and start taking pre-orders through a selected FFL dealer. Then, without any notice or explanation, they went silent and the project vanished.  That was a crappy way to dump the dedicated customers that watched and participated in their forum on the project from the start until they crapped on their customers.   

[Bruno747]

M&P 10mm
Henry 10mm magnum/10mm/40sw big boy
Henry 500 S&W
Sako exige (in any caliber really) in 6.5 creedmore or 300 win
4" xds mod 2 10mm
Desert Eagle 10mm magnum
Bren Ten

I also hope the 429 round magnum research is working on comes to life.

[oldman10mm]

AR10 16" barrel 358 Winchester. Same chamber headspace as 308Win,different barrel. There are some 'customs' being made,but want a regular production item.

[Sneed]

A decent pistol caliber carbine and an AR pistol in 10. The Hi Point would qualify except for its hideous "accuracy" and "unusual" features. The NRA review of this carbine showed about 3.25 inch groups at 25 yards from a rest and other reviews do not yield a picture of a firearm I'd want.

https://www.americanrifleman.org/articles/2018/5/1/tested-hi-point-firearms-1095ts-10-mm-carbine/
https://www.thetruthaboutguns.com/2018/04/jon-wayne-taylor/gun-review-hi-point-1095ts-edge-10mm-carbine/

An AR pistol with about an 11" barrel and large magazine strikes me as about a perfect firearm to keep in a vehicle. Right now that's not an absolute necessity but things are changing and not getting better.

[The_Shadow]

The VLTOR Bren Ten 10mm. A modern version of the Dornaus & Dixon Bren Ten, but, built with superior metallurgy and machining technology. VLTOR dropped the ball and screwed over all of the people that had been following the development from the Fortis to the Bren Ten name as well as the reported news from VLTOR that they were machining the frames and preparing to go into full production and start taking pre-orders through a selected FFL dealer. Then, without any notice or explanation, they went silent and the project vanished.  That was a crappy way to dump the dedicated customers that watched and participated in their forum on the project from the start until they crapped on their customers.

inv136, have you seen the Combat Service Pistol project by Chuck Warner of Elite Warrior Armament 1512 Golf Course Rd, Rio Rancho 87124   phone# 5052277962.  He is in the process of making some Bren Ten Clones and sill has some spots available...  These will be $3500 but they should be a finely crafted pistols based on his other works...