Elusive 10mm 200gr Hi-Tek coated FN 'woods load' bullets

[Taterhead]

https://www.montanabulletworks.com/product/10mm-lbt-200gr-wfn-pb/

Call them, these are available coated

Good call!

I have an LBT mold for this bullet. I cast and coat my own. It is great! 1250 fps from the G20 with great accuracy. It loves Accurate No. 9.

[RedTeam98]

https://sscastbullets.com/product-category/bhn/bhn-22/40-bhn-22/

[RedTeam98]

This is my Alaska load I use the 220gr Version
Hard Cast 22 BHN High Tek coated
Very good with 9.5 of Blue Dot

[RedTeam98]

Glock 20
220gr Hardcast

[Kenk]

What the heck, that critter is enormous

[Alaska]

After loading a few thousand 9mm and 45 ACP rounds I'm now getting started on loading for a new Glock 20 Gen 4...and would like to find a reliable source of Hi-Tek coated 200gr hard cast bullets for woods gun rounds...I've looked high and low for bullets that might be the right one and it seems that one similar to the one used by Underwood in their Hard Cast FN round is the one to try to find..

I've checked a lot of bullet sources (Acme, Missouri, Blue, Summers, Ranier, Dardas, BnB, etc) and none offer such a bullet...any thoughts? Underwood doesn't offer components, alas...

Thanks!

Commo

220gr Black Cherry Hard Cast Underwood is actually 212gr
Try Straight Shooter Cast Bullets BHN 22 in 220gr just like Underwood come in at 212gr With a BHN 22

[Alabusa]

Look no further than Brass Monkey Bullets

https://brassmonkeybullets.com/40-10mm/200-gr-fp/


Sent from my SM-G986U using Tapatalk

[Kenk]

So I guess the question is, what?s the desired BHN a superior bear load? Buffalo Bore says a BHN of 11 to 30, but what would be the optimum hardness

[Alaska]

BHN 20 to 22 is the most common for shooting thru shoulder blades or skulls.
Also shooting these Hard Cast leading the barrel becomes less of a issue. I really like the 220gr Hard Cast Black Cherry (actually 212gr) in my G20 in Alaska.

If you add a Gas Check to the bullet it will get close to 220gr in weight.

[Kenk]

Underwoods 200gr Black Cherry hard cast looks promising as well. 1,250 / 694 ft. lbs

https://underwoodammo.com/10mm-auto-200-grain-hard-cast-flat-nose/

[bigboredad]

Montana bullets has what you are looking for

Sent from my SM-A426U using Tapatalk

[Kenk]

Cool, Thanks!