G20 gen 4 to 9x25 dillon conversion

[Kenk]

So if I were to to do a G20 gen 4 to 9x25 dillon conversion at some point, is the 9x25 dillon barrel all that is required? Also, I am currently running the factory recoil spring in the G20, will that need to be changed out for the 9x25. This look like a fun caliber, plus if I could find a longer aftermarket barrel I could really utilize the 9x25 capabilities
Thanks Folks

Ken

[The_Shadow]

The impulse of the 9x25 is different for 10mm and the factory spring of the gen 4 should work well.
I run the Non-Captive Wolff steel recoil rod and 22 lbs spring in my G-20SF for just about every thing except the 9mm conversion.

[Kenk]

Thanks Shadow, so the 9x25 barrel is all that would be needed for the conversion then, correct?

Ken

[Pablo]

Thanks Shadow, so the 9x25 barrel is all that would be needed for the conversion then, correct?

Ken

yep

[Kenk]

Now I just need to find a longer barrel without having to pay an arm & a leg

[Kenk]

So does anyone make a G20 gen 4 to 9x25 Dillon 6" or longer barrel for under $200.00? I would be ok with a standard length Glock barrel in a 9x25, but longer seems to be more desirable. The only barrels I'm seeking, which are few are really expensive, say 2-3 hundred
Thanks

Ken

[Pablo]

So does anyone make a G20 gen 4 to 9x25 Dillon 6" or longer barrel for under $200.00? I would be ok with a standard length Glock barrel in a 9x25, but longer seems to be more desirable. The only barrels I'm seeking, which are few are really expensive, say 2-3 hundred
Thanks

Ken

LW no longer makes them??

[sqlbullet]

They don't list them.  I don't know if they have dropped them completely, or if they only do a run or two a year and they are just currently out.

[Kenk]

So who make these barrels at a reasonable price, regardless of length? I'm ok with paying 100 - 200, but can't really justify paying more
Thanks

Ken

[The_Shadow]

Lone Wolf quit having the Stainless Steel barrels made in favor of their Alpha Wolf line of barrels.  That being said they haven't started producing any of them as conversions like the 6.02" 9x25 or 357Sig for the G-20 or G40.

With the G-40's using the same barrels as the G-20's I thought they would have made some of these conversions already.

I think KKM will produce the 6.02" barrel if you call and request it.  There is still a market for the 9x25 and 357Sig conversions for these G20's & G40's

[Kenk]

Thanks Shadow, so if I understand correctly, and can find one. a 9x25 barrel made for the G40, will work fine in my G20 gen 4, right?
Thanks

Ken

[Kenk]

Well I emailed KKM to see what if anything they could offer me in a 9x25 - G20 / G40 conversion barrel....kind of excited to see there response

[ss30378]

Barsto also has 9x25 barrels in stock for the 20 and 40 if kkm isn't making a run anytime soon.

[Kenk]

Thanks 30378, looks like they are around $220.00, I think I paid around $150.00 for my G20 KKM barrel, may have to hold off at that price