180gr Berry Plated TC at the range

Started by RDub01, February 29 2016 11:23:15 PM MST

Previous topic - Next topic

Benchrst

G20.4 / LW / Overwatch / Sevigny

Greg_Peeples

#16
Would 10gr of power pistol be my max. I like knowing my limit. And how fast is that gonna be? Thanks for your help. I'm brand new to 10mm not reloading. All the info I can get helps. Most of the old timers are passed on.

The_Shadow

#17
Greg_Peeples. your 165 grain bullets with a 10.0 grain load of power Pistol will be at or over 1440 fps..and may have a case blow out depending on case support and casing being used...
But lets us know how you make out!  Be safe!
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

Greg_Peeples

I will. Probably stop at 9.5. This pistol is way more comfortable to shoot than the .40 ever was. That's why I wanted it.

Greg_Peeples

Sorry forgot to say thanks. Hard to find good info.

Greg_Peeples

9.5 cycled the pistol. Everything up to that I had a couple jams. No pressure signs. Should I try a 9.6 or 9.7?


Sent from my iPad using Tapatalk

tommac919

No pressure signs. Should I try a 9.6 or 9.7?

That's a question only YOU should answer.  Every gun is a bit different and also how accurate are your loads? 


Greg_Peeples

Yeah I thought that after I put the tablet down


Sent from my iPad using Tapatalk

tommac919

You'll find that usually the max/fastest loads aren't the most accurate... you have to sort of find the sweet spot for your gun.

Whether to go up higher is a choice based on what your trying to do and how careful you are doing it.  :)