New Trigger for the Mech-TECH

cwlongshot · May 10 2015 04:26:34 AM MDT

I ordered a RECOIL trigger for the G20 on the Mech-tec last week.

I learned the Glock trigger and can shoot it pretty well in a handgun. Normally my Glocks are carry guns so I do NOT alter the parts of the gun sans Springs. But this G20 was never a "carry gun" its defensive yes, but mostly four legged and hunting use. Then the Mech-tec came along now its pretty much dedicated to that. But I have gotten many of the trigger goodies to smooth and lighten its trigger. I have long read about these triggers with there claims of what they do to the triggers on Glocks.

I really find the trigger troublesome in the rifle/carbine that is a Mech -tec. SO, I bought and will install the trigger later today and see what I get. ${$default_wink_smiley}$

Any of you guys go this route already? (With a Glock trigger?)

CW

http://www.recoilweb.com/review-glock-triggers-from-oc-custom-60521.html

DenStinett · May 10 2015 08:28:42 PM MDT

I've looked at these Triggers
If you go to OC Customs site, they give you a lot of options

http://www.occustomtriggers.com/

gandog56 · May 23 2015 06:01:50 PM MDT

Quote from: cwlongshot on May 10 2015 04:26:34 AM MDT
I ordered a RECOIL trigger for the G20 on the Mech-tec last week.

I learned the Glock trigger and can shoot it pretty well in a handgun. Normally my Glocks are carry guns so I do NOT alter the parts of the gun sans Springs. But this G20 was never a "carry gun" its defensive yes, but mostly four legged and hunting use. Then the Mech-tec came along now its pretty much dedicated to that. But I have gotten many of the trigger goodies to smooth and lighten its trigger. I have long read about these triggers with there claims of what they do to the triggers on Glocks.

I really find the trigger troublesome in the rifle/carbine that is a Mech -tec. SO, I bought and will install the trigger later today and see what I get. ${$default_wink_smiley}$

Any of you guys go this route already? (With a Glock trigger?)

CW

http://www.recoilweb.com/review-glock-triggers-from-oc-custom-60521.html

Nope, I use a 1911 in my Mechtech. Never had any trigger problem.

cwlongshot · May 24 2015 06:50:06 AM MDT

It IS better.

CW

DenStinett · May 24 2015 09:20:31 PM MDT

CW:
How do you like the Grooved Trigger ?
I was thinking of getting the Smooth Trigger set-up for my MG20
What options did you get with yours ?
Thinking of adding the Overtravel to the adjustable Take-up
Black on Black, with the Enhanced Safety
OEM Assembly Tool and new Pins

DenStinett · May 30 2015 12:23:36 PM MDT

Ordered mine last night:
SMOOTH ALL GEN G20/SF,G21/SF, G29/SF, | $40.00 |
G30/S/SF, G41
COLOR / MOD STYLE: BLACK (NO COLOR) -$5.00
(POLISHED BAR WITH PRE-TRAVEL ADJUSTMENT)
ADD OC "ENHANCED" MODIFICATION (OUR MOST +$20.00
POPULAR MOD!): CONTOURED SAFETY FOR COMFORT
ADD OVER TRAVEL ELIMINATOR: GEN1-3 10MM/45 +$15.00
(NOT FOR SF MODELS) GLSP08203 (REG $20)
ADD 3.5# CONNECTOR (INTEGRAL PART FOR A
LIGHTER TRIGGER PULL): NO THANK YOU (didn't figure I really needed this for a Carbine)
ADD WOLFF SPRING PAK(DESIGNED TO HELP TUNE
LIGHTEN TRIGGER PULL): NO THANK YOU (didn't figure I needed this for a Carbine either)
ADD OEM DISASSEMBLY TOOL: GLOCK FACTORY +$8.00
OEM DISASSEMBLY TOOL (REG $10)
ADD GLOCK ORANGE ARMORERS HALF PLATE
(RECOMMENDED w/ELIMINATOR): NO THANK YOU (not sure how this would work on the CCU)
Total: $78.00 (a lot better than the $100.00 - 250.00 for other brands)
Plus new Pins and shipping: $96.25

A couple weeks for delivery
Really looking forward to trying it out
It's gotta be better than the 6 pounds and .25 inches of take-up I have now ${$default_shocked_smiley}$

DenStinett · June 08 2015 09:59:50 PM MDT

Received and installed the new OC Custom Trigger
Now the Trigger had a touch over 0.125 inch take-up, breaks at a crisp (and consistent) 5.5 lbs and little under 0.125 inch over-travel / reset
Looking forward to get it out for some (NEW) Trigger time ${$default_cool_smiley}$

gandog56 · June 09 2015 01:01:42 PM MDT

Had the Mechtech out at the range again today, Another couple hundred 10mm reloads shot. Good thing I just got a new shipment of 180 grain lead!

Seriously, this thing is just WAT too much fun to shoot. ${$default_grin_smiley}$

DenStinett · June 19 2015 10:53:00 PM MDT

Ordered and added the Ghost Inc Ranger 4.5 Connector to my MG20 today
http://www.ghostinc.com/category/12_45lbranger/
I went with the 4.5 not the 3.5 because I don't intend on ever using the Lower as anything but the Receiver for my CCU
And I'm just looking for a crisp, clean consistent break on the Carbine
Now with the Ghost Ranger and the OCC Trigger, the MG20's Trigger now breaks at a very consistent 4.9 lbs
Can't wait to get it out to the "Range"