Grand Power 10mm...any updates?

Dave84 · January 28 2015 09:09:08 PM MST

Looks quite nice.

Intercooler · January 29 2015 10:12:06 AM MST

In here you will find more pictures and some details:

http://www.glockpost.com/forums/showthread.php?p=192511

Canuck223 · January 29 2015 02:37:59 PM MST

Quote from: Intercooler on January 28 2015 07:14:28 PM MST
Rotating like Beretta employs.

My favourite part of IWA is the inevitable moment when the engineers from Beretta come over to our booth. They look at the clean and simple lines of our barrel and the frame mounted roller bearing, and then tear up a little. ${$default_laugh_smiley}$

Once Eagle Imports have the paperwork from BATFE and the US State Department for the 10mm and .357 SIG versions, you will see them in the US.

Canuck223 · January 29 2015 02:41:55 PM MST

Quote from: Intercooler on January 24 2015 12:12:48 PM MST
For those of you who know Henning (or don't), that is him seated to the left and a good sign. I can see parts to customize, improve, etc... your Grand Power!

My pictures take on a life of there own. Henning has been to the factory and our armourers course.

The_Shadow · January 29 2015 03:06:42 PM MST

Canuck223, Welcome to the forum! Thanks for your post!

Best regards! ${$default_cheesy_smiley}$

Intercooler · January 29 2015 03:26:07 PM MST

Thanks for stopping by! We are really excited to see these coming our way. It seems the only concern from the group is how it will do in the brass expansion department with Underwood and Buffalo Bore. Will their be different versions of the 10mm (slides, finishes, etc...)?

Canuck223 · January 29 2015 04:27:48 PM MST

Quote from: Intercooler on January 29 2015 03:26:07 PM MST
Thanks for stopping by! We are really excited to see these coming our way. It seems the only concern from the group is how it will do in the brass expansion department with Underwood and Buffalo Bore. Will their be different versions of the 10mm (slides, finishes, etc...)?

There is no unsupported area in our barrels. There is a very slight radius that sits right at the extractor groove. If your ammo is to SAMMI specs, there should be no concern at all.

Besides the P40, there is a 5.0 inch version coming, and always the potential for a surprise at IWA in March.

Finishes are currently limited to our nitro-carborized (tenifer) or Boron Nitride (PVD), but may include titanium nitride or Ti-Al Nitride in the near future. We have played with them both and when it's perfect, it will ship.

Intercooler · January 30 2015 02:13:38 PM MST

Bruno747 · January 31 2015 05:58:05 PM MST

Good to see the conversation is moving forward. Anyone know how long it usually takes BATF to approve a new caliber firearm for import?

Buddy10mm · February 11 2015 02:59:43 PM MST

Man this gets me excited! Once a there's a 10mm in the lineup, I'm interested in the entire line. Until then, I basically kind of pass them over: I'm looking for a whole "family" of pistols that operate along the same lines, so that I don't have to retrain myself from one carry pistol to the next.
This makes me want to look at the whole Grand Power line...

I wish more gun makers would realize this: a 10mm Flagship would draw in a lot of attention.

Bruno747 · February 21 2015 07:43:05 PM MST

Getting itchy, GrandPower seems to have gone silent on us.

Anything new on the front, or are we still waiting for atf to quit using their pens to dig in their ears and sign the approval?

Intercooler · March 05 2015 05:35:02 PM MST

I'm liking it!

Bruno747 · March 17 2015 03:05:31 PM MDT

Come on grand power just a hint of a timeline.

Bruno747 · March 29 2015 10:55:18 AM MDT

Hey grand power...SHHHH!

Dont want you to get too loud in here.

That being said, BUMP, I want more info on when this will be available in the US. Canada has had them for some time now!

gcw16 · March 29 2015 11:53:56 AM MDT

Canuck223 posted on another board that it would be "summer or fall".