current EAA 10mm

Started by ct111, December 26 2014 06:00:16 PM MST

Previous topic - Next topic

ct111

Are the current EAA 10mms okay to buy now ? have they solved all the issues (frames cracking, bad springs ,bad mags etc..) i like the cz platform but have been leery of getting one because of past issues ? thanks

sqlbullet

Go for an Elite series gun.  They will be a bit more , but they are solid guns and have been all along.

pacapcop

#2
I am going chime in and say the newer full size with squared off slide and rail. I feel it's plenty robust. Not the Compact though. Feed issues. I am jumping back in for the basic full size myself. Like my previous Witness models, I keep it around Norma spec levels and run it with 18lb spring. The k10 mag's are great.

Geeman

I have the Limited Pro, and if I throw everything but the kitchen sink at it, I might have one in 500 rounds fail to feed.  Its rare enough that it almost startles me.  The only parts upgrade I'd say were necessary are a stiffer spring for high impulse ammo, and a Henning cone fit guide rod because it does solve the issue it is supposed to solve.  The full size series are heavy pistols, but they run ever so sweetly.  I HIGHLY recommend the Witness Elite full size platform.

I also have a compact steel.  Feels great, but not reliable.  That smaller magazine is from a different supplier and just isn't up to the task.  It seems to run best with a lighter spring and milder ammo.  That twin spring it ships with is pure trash.  I do NOT recommend the models that use a compact magazine.

Greg

sstewart

I have 10mm elite match and a 10mm limited. Both are very reliable. And as stated they pretty much fire any ammo. Both are SA guns.
I think the P Carry have good reputations, but I don't own that yet.
I don't think the steel standard witness models are as nice as the match, but are DA if you like that. (You can improve the function of these with polishing and some home brew gun smithing)

I have sold & traded my M&P for EAA pretty much and I don't regret it.

sstewart

PS I have an RIA 10mm 1911 also, so its not the only 10mm I own. I like this also but I shoot the EAAs much more

shootz

I have the Elite Match in 45 with 10mm and 22rf tops,  buddy bought the same setup. I had to fit the top to mine, buddy's just slide right on. Another friend had to go one better and bought the Limited in 10.

We all have Henning recoil rods and bought the spring kits from Wolff. 18 lb. seems good.

I added Dawson fiber front, Hennings front is too high for the Match.

ct111

hows the accuracy in the elite match 10mm ?substantually better than the standard full size steel 10mm ?

Geeman


pmd428

I just purchased a 10mm Witness P-carry and ran some 135jhp through it Zero problems so far. I added the wolf 22# spring and let me tell you this gun is a brass launcher!

ct111

i ordered a EAA witness elite match 10mm today. let you know how it turns out. thanks

Bongo Boy

I think you're going to be very happy with it. I have the Witness Hunter which I just put a couple hundred rounds through day before yesterday, and it reminded me of just how much I enjoy shooting that gun. I had quite a variety of loads, but quite a few of them I'd describe as 'full spirited'. Maybe 1,500 rounds through the gun now, roughly, and I believe it's rock solid. I believe I was drooling at the model you just bought--being offered at either Guns America or Gun Broker. Very nice.

mrscottie

I bought my EAA Witness 10MM full size off Gunbroker almost a year ago, and its shoots superbly. I have a Para LS Hunter 1911 in 10mm and the Witness is more accurate and is probably my favorite handgun I own. I plan on carrying it once my new holster comes in from Foxx.

The_Shadow

mrscottie, welcome to the forum and congrats with the new edition in your 10mm family!
Hope you enjoy the forum. ;)
Best regards! 
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

ct111

does anyone make grips that will fit the eaa witness elite match 10mm? i don't care for the factory grips