EAA Match 10mm

Started by mt10mm, March 08 2014 03:56:24 PM MST

Previous topic - Next topic

Geeman

Quote from: MT10mm on March 29 2014 07:04:58 PM MDT
Since I am not able to find one local to handle. Could someone give me a grip comparison between say the Glock 20 and a Match? All the pics I see make the grip look real wide. I have Med. size hands and dont want to make 550.00 mistake.

The grip on a Gen4 G20 (roughly the same as Gen3 SF) feels like a 2x4 when compared to my Limited Pro.  I was surprised by how compact the grip was for a double stack!

Greg

Intercooler

Really nothing but a $8 Wolff 20-22lb spring out of the box. Adding the $40 Henning Cone guide rod:
http://www.henningshootsguns.com/pages/2009_guiderod.html

and $25 Henning flat bottom firing pin block:



will make it last and last. I had thousands of extreme end 10's through my Match with this setup.


Intercooler

Tell me what areas on the grip you want measured and I will bust out the Pro. You could then compare it to one of your Glocks.

mt10mm

#18
I am think of the Match for my woods carry sidearm. As long as its no bigger then the SF g20 it will be good to go

Intercooler

Width measures 1.170"-1.175"
Length measures 2.120"-2.125"

The area where the grip pinches in under the mag release and trigger guard measures 1.925" in length.

mt10mm

I think it will be a perfect fit for me

mt10mm

Quote from: Intercooler on March 29 2014 08:15:43 PM MDT
Width measures 1.170"-1.175"
Length measures 2.120"-2.125"

The area where the grip pinches in under the mag release and trigger guard measures 1.925" in length.


Much smaller then my Non SF G20

Intercooler

The Glock SF is 1.28" wide and I couldn't find the length. I guess none of the owners ever measured one  :o

mt10mm

#23

                    G20                         G20SF                    G20 Gen4
LENGTH   209 mm / 8.22 in.   204 mm / 8.03 in.   204 mm / 8.03 in.
HEIGHT   139 mm / 5.47 in.   139 mm / 5.47 in.   139 mm / 5.47 in.
WIDTH   32.50 mm / 1.27 in.   32.50 mm / 1.27 in.   32.50 mm / 1.27 in.
BARREL HEIGHT   32 mm / 1.26 in.   32 mm / 1.26 in.   32 mm / 1.26 in.
BETWEEN SIGHTS   172 mm / 6.77 in.   172 mm / 6.77 in.   172 mm / 6.77 in.
BARREL LENGTH   117 mm / 4.60 in.   117 mm / 4.60 in.   117 mm / 4.60 in.
WEIGHT (Unloaded)   875 g / 30.89 oz.   870 g / 30.71 oz.   870 g / 30.71 oz.
WEIGHT (Loaded)   1125 g / 39.71 oz.   1120 g / 39.54 oz.   1120 g / 39.54 oz.






                                                                                                                                                     
741566111495   600650   EAA Match 10MM   15+14.75"-Barrel 8.75"OVAL 1.4"Wide   5"tall   44 weight   





Intercooler

  I ran all kinds of searches and can't find a single reference to the grip dimension front to rear. Only side to side width  ???

mt10mm

From what I have found the match looks to have a larger grip

Intercooler

Found a G17 Gen 4



I have shot a Gen 3 G19 and handled a G20 Gen 4... no comparison and I have small hands as well.

Intercooler

That lower portion marked "A" and "B" is where the Match doesn't grow in dimensions and mainly why the feel is a ton better. It's basically the same size the full length.


mt10mm

Just placed my order with Buds for one, can't wait till it gets here!

Intercooler

You will throw those other ones away ;D Wish I could buy one 8)