Odd problem with RIA 10mm

[10mmfan]

I've had good luck with the 18 1/2 lb I also have a spare 18 1/2 lb a 20 and 22. I have a 26lb mainspring in the RIA and I put in a flat firing pin stop.

[gandog56]

Springs I have lots of. When I ordered my Fusion Firearms custom 10mm, they threw in different wpoundage springs to "fine tune" the pistol. But the set that was installed seemed to work fine.

Still on a quest to find an RIA Tac II 10mm. Need to keep them springs I think.

[sstewart]

Word on RIA forum from a guy that physically stop at Armscor in Nevada was 10mm hits the states about now. (End of April)
If true, should show on gun Genie or local dealer in 1-2 weeks.

[harleyhopper]

Springs I have lots of. When I ordered my Fusion Firearms custom 10mm, they threw in different wpoundage springs to "fine tune" the pistol. But the set that was installed seemed to work fine.

Still on a quest to find an RIA Tac II 10mm. Need to keep them springs I think.

Did the Fusion manual give guideance with the spring assortment? Seems as there is a lot of trial and error. Steve

[Deerslayer]

I had the same problem with mine. It even rapid fired a couple times. Took it apart just like they said and it wouldn't go back together. If you are dealing with Ryan call and talked to him. He told me 3 weeks to and I told him This is a brand new gun not even 30 rounds through it. He put it in front of the line and I had it back in a week. I had the safety swapped out to so I could put my Crimson's on it. It doesn't like 1.260 ammo ether 1.250 it loves ? I got some DoubleTap 235gr and I'm going to try and bust a hog with it Tomorrow. Good Luck I haven't had a problem with mine since I got it back. You can get a extra magazine for $24.00 and they will stick it in the box with it. Most 1911 10mm magazines will work. I have a Delta Elite and the mag's work in both guns.

[gandog56]

Springs I have lots of. When I ordered my Fusion Firearms custom 10mm, they threw in different wpoundage springs to "fine tune" the pistol. But the set that was installed seemed to work fine.

Still on a quest to find an RIA Tac II 10mm. Need to keep them springs I think.

Did the Fusion manual give guideance with the spring assortment? Seems as there is a lot of trial and error. Steve

Not really. But like I said, the reloads I shoot and the springs that were installed seemed to work fine. He told me what poundage springs was in the gun, but I forgot what it was.

[sstewart]

Hey gandog56
I just saw a 10mm rail Armscor at cabelas. Wanted 749.99

[10mmfan]

Or gunbroker I almost bought one $600 no rail though

[sstewart]

Thats a good price. I paid 640 approx. Dealer was asking 710 for it

[gandog56]

Or gunbroker I almost bought one $600 no rail though

Don't want a rail. First of all, the fiber optic pipe works great in daytime. For nights I like my Crimson Trace grren laser grips.

[10mmfan]

Or gunbroker I almost bought one $600 no rail though

Don't want a rail. First of all, the fiber optic pipe works great in daytime. For nights I like my Crimson Trace grren laser grips.

I actually replaced the fiber optic with a white dot and blacked out the rear sights to speed up aim time.

[gandog56]

My Fusion Firearms 10mm has the pipe, I really like it. But if I wanted a night sight instead of the Crimson Trace laser grips I put on it, I would get some tritium ones.