Chronographing several 200gr loads, Double Tap and brass expansion test today

REDLINE · June 17 2013 02:31:05 AM MDT

Thanks for spelling it out for me! ${$default_cool_smiley}$

Caneman · June 17 2013 07:07:12 PM MDT

thanks for the report Intercooler, looks good ${$default_cheesy_smiley}$

445 supermag · June 17 2013 09:41:43 PM MDT

Please forgive my ignorance but JAG BRASS???

Brian

sqlbullet · June 18 2013 08:52:21 AM MDT

http://www.jagemanntech.com/

The_Shadow · June 18 2013 09:06:32 AM MDT

I did contact them to see about them selling the brass as component for handloaders...

QuoteWade,

Pleased to meet you...... I appreciate you saying the kind things about our brass. I do not have any 10mm brass with JAG head-stamp that I can send to you currently. About 95% of all we do has the manufacturers head-stamp, and I would not be at liberty to forward that. I will keep you in mind here, and if I can get a JAG run through late this year..... I will get some to you. There will be a day when things get back to normal a bit, and we then plan on having reloading brass available through retail channels. But for now we are doing all we can to handle the ammo manufacturers.

Best regards,

Scott Bitter
Product and Key Account Manager
Jagemann Technologies

Ramjet · June 23 2013 11:06:26 AM MDT

I will add some data I gathered today.

Gun Glock with a LW 6" with compensator screwed on the end and a long slide upper.

Temp-70 deg F

15 feet from Chronograph.

180 Grain XTP 9.7 Grains Longshot with CCI Lg pistol primer. 1436 FPS average. I think this load is too hot.

180 Grain Federal Hydra-shok personal defense factory load 1072 FPS average.

200 WFN Hard cast loaded over 9.0 grains of Longshot 1242 FPS average. CCI Large Pistol Primer.

I have a good micrometer on order so all subsequent data will include case head expansion.

REDLINE · June 23 2013 07:03:09 PM MDT

Quote from: Ramjet on June 23 2013 11:06:26 AM MDT180 Grain XTP 9.7 Grains Longshot with CCI Lg pistol primer. 1436 FPS average. I think this load is too hot.

Nice! ${$default_cool_smiley}$ How did the primer look?

Ramjet · June 23 2013 08:02:20 PM MDT

It was flat but not extruded around the firing pin.

This load would put bad smiley faces in the factory chamber the LW is tight.

REDLINE · June 24 2013 03:58:25 AM MDT

Good to hear about the primers. Also nice you have one of the Lone Wolf barrels from when they still offered excellent chamber support. The new ones, not so much.

Ramjet · June 24 2013 06:06:59 PM MDT

I will admit I had allot of hand honing and fitting with the long-slide to get it to function right but it has always been very accurate setup and with my Trijicon RMR it is allot of fun to shoot.

I get chance I will post a pic.

It prefers cast WFN and I am ordering an LBT 200 WFN 4-cavity mold tonight for those exact bullets.