10mm 180gr XTP with Power Pistol loads

Started by Kenk, August 12 2017 05:14:49 PM MDT

Previous topic - Next topic

Kenk

I understand this may be on the lower end, but are some of you folks staying in the 8-9gr range when loading 10mm 180gr XTP with Power Pistol? I've loaded .45 auto, and 9's for years, but am new to 10mm. I am running a stock G20 gen 4
Thanks in advance

The_Shadow

Kenk. welcome to the forum!  I have loaded Power Pistol up to 10.0 grains hand weighed and verified...based on other loads others were doing and some commercial pull downs...
Tested in 10mm S&W1006 5" 1349 fps June 8, 2013.  Case expanded to 0.4275", primer slightly flattened, case shows some stress.
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

Kenk

Nice, I am hoping at some point to get close to duplicating some of Underwoods loads, some of my favorite carry / hunting ammo
Thanks again, I have much to learn & look forward to it

Ken

The_Shadow

Ken just be sure to work your way up and verify your ammo in your gun as setup.  Some of the pull downs go back to a time where the upper limits were being pushed and things had to be right with the guns, recoil systems and brass...
Be safe!
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna