One polishing job down

[Intercooler]

I picked up some of these:

http://www.amazon.com/gp/product/B006Z6YQEE/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1

Trying them tonight on the 1006 barrel.

[StockIIBoss]

Kewl. I added it to my Amazon wish list.

[DenStinett]

I picked up some of these:

http://www.amazon.com/gp/product/B006Z6YQEE/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1

Trying them tonight on the 1006 barrel.

You use Polishing Rouge with them, yes ?

Here are the Craytex Points that work as is, no Rouge

http://www.amazon.com/TEMO-RUBBER-rotary-polishing-DREMEL/dp/B004HSGDMU/ref=sr_1_7?ie=UTF8&qid=1388904305&sr=8-7&keywords=cratex

And they have a ton of different sizes, shapes, and grit

[Intercooler]

I tried the Q-Tips in the Dremel and they fragged instantly!

[Dann Fassnacht]

I hand-polished the feedramp in my Glock 20SF.  I started with 1500 grit wet/dry sandpaper, went to 2500 grit, and finished off with a mirror-finish, using Mother's Mag Polish.

[msjayhawk]

I use diamonds. Takes about 1 minute with 1000 grit and 1 minute with 2000 grit. I use a Q-tip in my Dremel and lock the RPM at about 1,500. Looks like a mirror in 2 minutes, basically. Works great on any surface you want to polish, and you can use it by hand, too. Dremel not required.

With the 5 gram containers, you can probably do 500 ramps....

http://www.mcmaster.com/#diamond-lapping-polish/=qhtdpw

[Intercooler]

  Looks good. I will have to get some of that!