If you have a perfect functioning Glock 10mm please post

[erdyalx]

I have 3. Glock 29 and 20 SF and a new Glock Model 40. They just run and shoot great. I have shot 135's to 200 grain from multiple sources and rolled my own. My close buddy shoots a Glock 20 gen4. We have had zero problems with anything. We powdercoat cast bullets and run many others. We have shot lots of stuff. From small things to deer and elk. These guns are a hoot.

"God bless and good shooting"
Erik Dyal

[NOI]

Gen 3 Glock 20SF
Deus Ex Machina trigger kit, stock otherwise.

No problems so far of any kind shooting the following:

Armscor 180gr FMJ
American Eagle 180gr FMJ
Federal 180gr Hydrashock JHP

I've got some Underwood sampling's on the way with lighter and heavier projectiles. I'll update.

[cphills]

G20SF
Runs all my handloads with stock and LW ported bbl. Zev trigger group.

[Paul James]

G40 10mm
Stock barrel
Stock recoil spring
Suarez face shooter trigger np3 coated
Over travel and trigger stop trigger assembly
Zero malfunctions in 400 rounds so far. 180xtps to 200gr cast loaded full tits.

[RDub01]

Ok, I'll chime in..
G20-SF; Have a KKM 4.6" SS barrel for cast and plated. Works beautifully..
Have an ISMI 22 lb spring but rarely use it.
Vast majority of shooting and posts done is with the bone stock gun.
Ammo.. Too many to list..  Never a malfunction.

[Taylor3]

My G20 and G40 run problem free with at least 12 different brand/bullet weights ive tried.

[Taylor3]

my G20 works great with the stock barrel and with a drop in .357 sig.
my G40 works great.
both are failure free.

[greentick]

Gen 2 G20. Other than 5 boxes of PMC that I bought in 1991 it has always shot my reloads or (rarely) factory reloads. No problems after the early learning curve involving micrometer vs Mk1 eyeball regarding COAL lol.

About 10yrs ago I put in a 22# wolff spring and steel guide rod when I started working up some hot loads (in new brass). Also added tritium sights.

A few years ago put a ghost connector.

Otherwise stock. Many thousands of jacketed and plated and, rarely, lead. No problems.