BE-86 & 40 S&W

[cwall64]

Found a nice load for the 40 S&W this weekend.  Gun used was a H&K USP40.  I used Alliant's website to work up to these max loads listed and they performed well.  They also ran great through a Glock 27 Gen4.

BE-86 6.3 grains, WSP, Hornady 180 grain HAP, O.A.L. = 1.12"
H&K USP40 (10 shot measurement)
Grains:   180
Hi Vel:   1049
Low Vel:   1023
Ave Vel:   1037
Ext Spread:26
Std Dev:   8

Glock 27 (5 shot measurement)
Grains:   180
Hi Vel:   983
Low Vel:   962
Ave Vel:   974
Ext Spread:21
Std Dev:   8

BE-86 6.6 grains, WSP, X-Treme 180 grain RNFP HPCB, O.A.L. = 1.12"
H&K USP40 (10 shot measurement)
Grains:   180
Hi Vel:   1049
Low Vel:   1022
Ave Vel:   1033
Ext Spread:27
Std Dev:   8

Glock 27 (5 shot measurement)
Grains:   180
Hi Vel:   969
Low Vel:   938
Ave Vel:   953
Ext Spread:31
Std Dev:   11

Charges were dropped with a RCBS Uniflow and every 5th one verified on a scale.



[attachment deleted by admin]

[grimreaper]

what kind of load for 165grfn with bullseye???

[The_Shadow]

Grimreaper, you keep asking about 165 grain FN bullets are these for 10mm? 40S&W?