Team Never Quit brass.

[Pumpkinheaver]

Picked up a bag of Team Never Quit 10mm brass this evening and was wondering if anyone had used this stuff before. It is made by a company called Jagemann. I tried a Google search but couldn't gather much information from what I've read.

Sorry for the crappy IPhone pics.

[The_Shadow]

Jagemann Brass is good stuff...I did test with several hot loaded firings and they held up quite well!  See my test info;

Using JAG Brass I loaded 10mm rounds put together with Hornady 200 grain XTP's...sent these to Intercooler for testing.  These had been pass through sized.  This is also the second firing.
Hornady 200 grain XTP one each of the following; He sent the brass back to me for further study.

Here are e results with expansion measurements at the widest measurement

9.4 grains IMR800X - matches Underwood loading 1250 fps  actual 1216 FPS/ 657 LBS.
0.4310" primer slight wipe OK, case mouth has a wipe mark

9.4 grains LongShot - matches Swamp Fox's loading 1240 fps  actual 1256 FPS/ 701 LBS.
0.4330" primers slight flatten some wipe OK

10.5grains Blue Dot - matches my load I use 1200 fps  actual 1138 FPS/ 575 LBS.
0.4310" primer slight wipe OK

8.4 grains Power Pistol - matches my load 1235 fps  actual 1195 FPS/ 634 LBS.
0.4310" primer slight wipe OK case mouth has a tiny wipe mark

12.6grains AA #9 - matches Accurate Arms book load 12.5 1170 fps 37,000 psi  actual 1130 FPS/ 567 LBS.  0.4320" primer slight wipe OK

13.0grains AA #9 - Above Accurate Arms book load 12.5 1170 fps 37,000 psi (2 Winchester Brass) 1129, 1165. Average = 1147 FPS/ 584 LBS.  both  @ 0.4330" primers flattened some wipe

RCBS 200 grain cast TCBB (SWC)  made 3 of these with my cast bullets
10.0 grains Blue Dot – 1200 actual 1096, 1080, 1119. Average = 1098.33 FPS/ 536 LBS.   0.4305" / 0.4305" / 0.4305" primer  very slight wipe OK

[Pumpkinheaver]

Good deal. I almost didn't buy it as I had never heard of it.

[will965]

Glad to hear...just bought 3 bags at cabelas  friday

[Idaho10mm]

I bought five bags of this brass a few months back. I've shot 100 rounds loaded with TNQ brass, and it's performed just fine.