Just so you know...10mm brass

Started by The_Shadow, October 27 2020 05:03:24 PM MDT

Previous topic - Next topic

The_Shadow

The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

DenStinett

So tell me again how Trump was worse then the 8 years before .... AND what came after HIM !

Rick R

I don't know about the International Space Station but I ran around for three weeks with two pieces of 10mm brass lodged in the windshield wiper tray of my pickup after I was shooting at the local outdoor range.
It was only parked about 25' behind the firing line.
:)
Hold my beer and watch this, Don't try this at home kids, Professional driver on a closed course...

Alabusa

 :D :D :D

That is so close to the truth. Even with a 26# recoil spring.

rognp

i regularly loose about 30% of my brass. i think it burns up on reentry. My G20 only tossed full strentgh loads about15', while the P220 tosses 25-30", accompanied by 30% brass loss.I think I need to get a 48 or 50# recoil spring.

Kenk


DenStinett

Yeah, I need to notify the neighboring Zip Code when I'm shooting the Witness Longslide !
So tell me again how Trump was worse then the 8 years before .... AND what came after HIM !

Kenk

I lose more like 50% of my brass, between the distance it flies and the fact it's a hay field I shoot at, it's tough to recover much

Ken

jazzsax8

Wonder if you set up one of those open tent shade structures nearby to capture the brass.  Might work for me as I set up on the prairie with a Caldwell shooters table.  Standing offhand would be another problem needing a bigger tent!

blaster

when I am going to shoot a bunch of 10mm, I set up one of those portable sun shades and hang screen on the right side and back. it stops the brass and really cuts the losses.

Kenk


Ten2six

I built this collapsible net. Set it on a tarp and stand by the net to shoot. It's easy to transport and stores nicely.

Sent from my Pixel 3 using Tapatalk

Youth and exuberance are no match for age and treachery.

DenStinett

I took the idea of the Catch-All, Brass Catcher
https://www.midwayusa.com/product/1014986821

.... and increased it to this:


I can set it up, on the Bench:


Or on a TriPod for standing, offhand shooting
It's been 99%+ affective
So tell me again how Trump was worse then the 8 years before .... AND what came after HIM !

Neal

I have a flat bottom firing pin stop on the way, and 3 extra power mainsprings (aka hammer springs)to try, 25, 28, and 30 pounds. I'm hoping that this will slow down the slide enough to reduce the distance the gun throws the brass. Don't want to increase the recoil spring if I do not have to.

DARSIG

I have to chase down my 10's also , my brass catcher got a girl friend and that's the last I saw of him


New to reloading? Get a great kit for a great price today!

Using this link at Amazon for your purchase helps the forum out with small commission. Your price and Amazon benefits stay the same!

Start shooting more today (cause you won't actually save)