I saw a similar thread on another forum about a Lipseys / Ruger wish list and was amazed how many people posted a desire for a 10mm something or other.

What would you like to see introduced at the Shot Show in 10mm?

For me:
An affordable AR 10mm DI that takes Glock 20 mags.
S&W "L" or Ruger GP100 in 10mm with MOS type mounting plates for optics.
Ruger SA Flattop Bisley in 5 ½"-6 ½"

Jeff

Marlin used to make a "Camp Carbine" chambered in 9mm and 45ACP, which is a neat handy little rifle.  I'd like to see a remake chambered in 10mm that would utilize the Glock 20 magazines, synthetic stock molded like the original wood and an up graded buffer system.



Still looking to see if ever VLTOR will ever remake the Bren Ten's as a way to preserve this timeless classic that started the pathway of our favorite cartridge.  This venture has flopped in the past, but it could be done at anytime.  But to get a Miami Vice Classic Bren Ten that would be a functional reliable shooter would be very desirable! 

A Glock built carbine.

fltbed hit it for me. 

A AR style lower that accepts Glock 20 mags, and a good DI upper.
A medium frame 10mm revolver
More time in my life so I can get to the range more.

I sent a message to Coonan, that their Coonan .357 Mag automatic had enough room to fit a 10mm Magnum round. It just needs a 6" or 7" slide to go with it.

I emailed Coonan a while back on the very same question as to getting the Coonan chambered in 10mm Magnum and a conversion barrel for the 9x30Dillon...never even got an acknowledgement response back one way or the other...

I emailed them the same thing and no response

Quote from: sqlbullet on January 01 2016 10:28:28 AM MST
fltbed hit it for me. 

A AR style lower that accepts Glock 20 mags, and a good DI upper.
A medium frame 10mm revolver
More time in my life so I can get to the range more.

The lower exists, or at least is in production.
According to locals who have their stuff set up for 9mm its nice.

http://www.quartercircle10.com/product/glock-large-frame-lower/

INteresting.  I have have to add that to my rather long list for 2015.

Quote from: The_Shadow on January 06 2016 12:02:58 PM MST
I emailed Coonan a while back on the very same question as to getting the Coonan chambered in 10mm Magnum and a conversion barrel for the 9x30Dillon...never even got an acknowledgement response back one way or the other...

I got a response.  Granted not much of one, but it was a response.  It just said they had forwarded my comments to their engineering section.

I don't know....
I owned a G20 (back when they first came out) for less than a month
Hated the damn thing
Well, now I have the MG20 (MechTech / Glock 20)
The Glock Lower for the CCU is all the Glock I own
BUT, I've been thing of getting a 6" Lone Wolf Upper to run on the Lower, just for Ss and Gs
So, what, technically, it still wouldn't be a GLOCK....RIGHT ?   

Quote from: DenStinett on January 06 2016 10:09:08 PM MST
I don't know....
I owned a G20 (back when they first came out) for less than a month
Hated the damn thing
Well, now I have the MG20 (MechTech / Glock 20)
The Glock Lower for the CCU is all the Glock I own
BUT, I've been thing of getting a 6" Lone Wolf Upper to run on the Lower, just for Ss and Gs
So, what, technically, it still wouldn't be a GLOCK....RIGHT ?   

My plan two years ago was to build a Glock with NO Glock parts!

Quote from: Pablo on January 07 2016 04:59:37 AM MST

My plan two years ago was to build a Glock with NO Glock parts!

ROFL!

Quote from: rw on January 06 2016 06:26:04 PM MST

Quote from: sqlbullet on January 01 2016 10:28:28 AM MST
fltbed hit it for me. 

A AR style lower that accepts Glock 20 mags, and a good DI upper.
A medium frame 10mm revolver
More time in my life so I can get to the range more.

The lower exists, or at least is in production.
According to locals who have their stuff set up for 9mm its nice.

http://www.quartercircle10.com/product/glock-large-frame-lower/

I think Ron williams at
Www.rmwextreme.com should be on your shortlist. 4 of us have these with varying degrees of reliability, but I think his is the most reliable of your choices. Quarter circle 10 is a real newbie in the upper business.

A 10mm upper is a lot more difficult than a 9 mm one. Because of the ratio of bullet diameter to bolt diameter.

Quote from: Pablo on January 07 2016 04:59:37 AM MST

Quote from: DenStinett on January 06 2016 10:09:08 PM MST
I don't know....
I owned a G20 (back when they first came out) for less than a month
Hated the damn thing
Well, now I have the MG20 (MechTech / Glock 20)
The Glock Lower for the CCU is all the Glock I own
BUT, I've been thing of getting a 6" Lone Wolf Upper to run on the Lower, just for Ss and Gs
So, what, technically, it still wouldn't be a GLOCK....RIGHT ?   

My plan two years ago was to build a Glock with NO Glock parts!

Timberwolf. Pre-order now.