The purpose of this sheet is to document relevant but often not published data about handguns for our favorite rounds.  In particular, actual weight of the entire gun with an empty factory mag, weight of the slide assembly (anything that moves with the slide), barrel, slide, and the slugged bore diameter.

I am publishing this in a table in this post.  If you have a firearm to add, please take as many of the measurements as you can and then post them.  I will vet and add them to the table along with the submitter.

Clarification:  All values are weights except the slug diameter.  The goal of this table is not to regurgitate values commonly found on mfg websites, but to document values we care about with high impulse guns that are NOT commonly found.  Specifically, the weight of the reciprocating mass.

Make    --	Model              --	Weight    --	Slide Assembly    --	Barrel    --	Slide    --	Slug Diameter    --	submitter
Glock	29 Gen2	27.7	20.6	3.9	16.1	0.402	sqlbullet
Glock	20 Gen 3 SF	30.6	22.3	4.7	17.1	0.402	sqlbullet
EAA	Witness FS (2008)**	40.7	17.3	3.8	12.3	0.4005	sqlbullet
EAA	Witness Match (2008)**	42.4	18.5	4.0	13.4	0.4005	sqlbullet
Para	P16-40	40.0	18.9	4.3	12.8	0.399	sqlbullet
Sig	P220 Elite 10mm	44.3	20.7	4.3	14.85	Unk	cgreth
EAA	Witness Compact	36.2	15.3	3.2	11.2	Unk	DenStinett
EAA	Witness w/Longslide	41.9	18.5	4.0	13.3	Unk	DenStinett
Colt	Delta Gold Cup*	39.7	19.95	4.1	13.3	Unk	DenStinett
EAA	Elite Limited	46.1	19.1	4.8	12.8	Unk	Intercooler
EAA	Hunter 6"	48.0	22.0	4.7	14.7	Unk	Intercooler
EAA	Elite Limited Pro	42.7	18.9	3.9	13.6	Unk	Intercooler
RIA	Tactical II FS SC	43	21.2	5.5	13.3	Unk	Zanderman
STI	Perfect 10	44.8	25.0	6.5	15.7	Unk	ottoman
Bren Ten	Standard Model	38	17	3	12	.3990	The_Shadow
Ruger	SR1911 10mm	38.1	20.4	5.0	13.2	Unk	sqlbullet
RIA	Rock Ultra HC 10mm	44.1	21.1	5.5	13.3	Unk	sqlbullet
Remington	R1 Hunter 10mm	45.3	22.8	4.9	15.7	Unk	Beemer!
Tanfoglio	Witness Compact Steel Wonder	36.2	15	3.8	11.2	Unk	bnolsen
Glock	G20 Gen2 Pre Ban	28.2	21	5.8	15.2	Unk	bnolsen
Glock	G40 MOS Gen4	32.5	27.5	5.9	20.9	Unk	anthaynes96
Kimber	Target II Stainless 6"	41.6	22.4	6.4	16.0	.4007	Road_Clam

*Denotes a gun with aftermarket parts installed that would alter the factory weights.
**More recent models are known to have design changes that may impact weights, such as rails.

Match 4.0" barrel?

barrel weight in ounces.

I have 1006 and Match weights somewhere.

Product Name DW Razorback – 10mm
SKU 01907
Firearm Type Handgun
Purpose Hunting
MSRP $1,480.00
Chambering 10mm
Magazine Capacity 9
Magazine Type Single Stack
Frame Stainless Steel
Grips Cocobolo Double Diamond
Trigger Mech SA
Sights Fixed Tactical Sights
Barrel Match
Barrel Length 5 in
Weight 2.4 lbs
Overall Length 8.75 in
Height 5.5 in
Width 1.45 in
Safety Manual Thumb Safety Grip Safety

Quote from: cgreth on December 14 2015 03:44:42 PM MST
Complete weight of pistol and empty factory magazine - 2 lbs and 12.25 oz

Slide with barrel and spring - 1 lb and 4.70 oz

Barrel only - 4.30 oz

Under zoom which i did for the pictures, there is a very thin portion of the cartridge that is unsupported by the feed ramp.   Still looks too small to be an issue with case bulges, smileys or blow outs.

sqlbullet

In your spec for the 220 10mm you list the barrel length at 4.3 inches.
Spec for the 220R shows as 5.03 inches....
Just wondering....and slide weight ?

thanks

Both the numbers are weights of those individual pieces, not lengths.

ppro, you weren't the first to be confused.  I have edited the original post for clarification.  The goal here is to document specs that the makers don't usually publish, but that we care about as enthusiasts.

Thanks for the edit.
I didn't know if there was a model I wasn't aware of, or if the specs were different.
Since it is the 5" your talking about, the the slide weight etc wouldn't change which was all I was wondering.

That is interesting information.  Manufacturers spec sheets usually give you a "high level" view.

The sig P220 reminds me of a cross between the S&W Model 1006 and the Bren Ten full-sized model. I think this pistol, or the Glock 20 would be the best pistol for the US Marines to carry into combat. Thread the barrel for a suppressor and you'd be "good to go".

Captain O

Hey SB:
I took some measurements of my 10mm Pistols

My Witness Compact Barrel is 3.682" and weighs 3.15 oz
The (old style) Slide is 6.42" and weighs 11.20 oz
The whole Upper weighs 15.25 oz

The Witness "Longslide Conversion" Barrel is 4.827" and weighs 3.95 oz
The (old style) Slide is 7.65" and weighs 13.30 oz (with Super Sights)
The whole Upper weighs 18.45 oz

My Delta Gold Cup
Barrel is 4.905" at 4.05 oz
Slide with fully adjustable Meprolight Sights is 7.45" at 13.25 oz
The full Upper with Hart's Recoil Reducing, Full Length Guide Rod is 19.95 oz
The (upgraded, as pictures) Lower weighs 17.05 oz
The Factory Magazine is 2.40 oz
The whole Pistol, less Magazines weighs 37.30 oz

Thanks!  Table updated.

I can give you the weights for the Limited and Hunter. I'm guessing you aren't inputting lengths?