HSM 200 grain fmj

Started by Dalbo, August 19 2014 12:34:47 AM MDT

Previous topic - Next topic

Dalbo

I picked up a box of HSM 200 grain fmj loaded in new Starline brass at Sportsmans Warehouse. I hadn't had a chance to try them out. Anyone chronoed them?

4949shooter

I checked both sheets and it doesn't appear they were chronoed by our guys.

Perhaps someone else has?

Intercooler

The HSM rounds aren't rated very high and why I skipped them.

Dave84

Wish I had a chrono. I've shot hundreds of the 180s years ago when they were cheap and available. They were a 40+p as far as I remember.

Intercooler

Pretty much all the info and more in here:

http://www.handgunforum.net/range-report/34001-10mm-hsm-200gr-fmj.html

I will add the info to the sheet. Any idea if that is 7.8gr's of Long Shot?

Intercooler

The Shadow,

                  It looks like he gave all the information for a standard pull-down. Do you want to add this information to that section? Maybe you can figure out the powder type to complete the data set. I ordered the 180gr version today to test and get the pull-down information.

The_Shadow

The Feb 17 2013 Pull-Down RDub has shown, looks to be 7.8grains of LongShot, The velocity is where it should be for that loading.  The newer loadings could be the same, but then again, with the supplies being what they are it may be hard to say.
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna