I'm new here, recommended by _The_Shadow (ty sir). Anyway, working up some 9x25 loads and thought I'd share....

Glock 20
Wolf 22# Spring kit w/ Steel Guide Rod
Lone Wolf Dist. M20/L 10-9x25 conversion 6" threaded barrel

800x Powder:

Nostler 124gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 11.0gr.
OAL = 1.250" (+/- .004)
1) 1702
2) 1712
3) 1690
4) 1736
5) 1696
6) --
7) 1652
1715
9) 1630
10) 1682
AVG: 1690

Nostler 124gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 11.5gr.
OAL = 1.250" (+/- .004)
1) 1739
2) 1772
3) 1722
4) 1745
5) 1755
6) 1710
7) 1793
1783
9) 1724
10) --
AVG: 1749

Nostler 124gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 12.0gr.
OAL = 1.250" (+/- .004)
1) 1832
2) 1827
3) 1860
4) 1829
5) 1765
6) 1820
7) 1818
1839
9) 1774
10) 1808
AVG: 1817

Hornady HAP 115gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 12.0gr.
OAL = 1.250" (+/- .005)
1) 1952
2) 1847
3) 1879
4) 1925
5) 1871
6) 1866
7) 1865
1915
9) 1940
10) 1910
AVG: 1897

Hornady XTP 90gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 12.0gr.
OAL = 1.250" (+/- .005)
1) 1997
2) 2004
3) 2007
4) 1957
5) 1952
6) 2005
7) 2002
1982
9) 1907
10) 1976
AVG: 1988

BlueDot powder:

Hornady XTP 90gr. JHP
CCI# 350 primers
Once-Fired brass
BlueDot @ 15.5gr. *compressed load*
OAL = 1.250" (+/- .005)
1) 2177
2) 2023
3) ---
4) 2048
5) 1971
6) 1975
7) 1996
1955
9) 1965
10 1985
AVG: 2010

I have a few (6-8) cases split like this...

A few primers fell out of their pockets prior to shooting - probably b/c they were once-fired brass, the pockets may have just gotten deformed... keep an eye on this.

On a final note.... in this video of my reliability testing, I cover an issue you all may have seen. Although the round would fire, eject, and successfully reload a new round, the Glock 20 trigger would not be reset. I had to "re-cock" it several times.

Please watch and let me know what you think....
If I failed to properly attach the video, you can find it here:
http://mydatabase.myftp.org/sniper168/9x25_Reliability_Test

Hello Sniper, welcome to the forum!  i moved the post here to the wildcats section where other 9x25Dillon info is shown.

I fixed your link to make it work...

I saw you responded to the GT post of questions I ask you, and your response was you didn't know what "Pass-Through" sizing was, I hope this can explain some things that the process may address and those that it will not!
http://10mm-firearms.com/reloading-10mm-ammo/pass-thru-sizing-using-lee-fcd/

here is a video of the Redding Pass-Through in use...

Thanks for the push into the right forum!
I'll report back later after the range.