IIRC the crimp die stays (has a carbide resizing insert as well), just back the adjustment screw out. Expander and bullet seating dies are the only ones that need to be backed out.

The local Bi-Mart just reduced the AE 10mm 180gr 50ct boxes to $30 (from $37.) Even w/ the rebate I'm not buying. I can get S&B 180gr for $15 at my LGS...

WSF is probably too fast for anything above FBI or plinking loads -- from Hodgdon's site:

10mm Auto
Case: Winchester   Twist: 1:16"   Primer: Winchester LP, Large Pistol   Barrel Length: 5"   Trim Length: .987"
Winchester WSF  Bullet dia:.400"  COL:1.260"

140 GR. BAR TAC-XP
Starting Loads                                 Maximum Loads
Grs.   Vel. (ft/s)   Pressure              Grs.   Vel. (ft/s)   Pressure
6.6    1,162          27,800 PSI          7.5     1,284        35,300 PSI

155 GR. HDY XTP
Starting Loads                                 Maximum Loads
Grs.   Vel. (ft/s)   Pressure              Grs.   Vel. (ft/s)   Pressure
6.8   1,100         23,000 PSI          8.4    1,320          35,600 PSI

180 GR. SIE JHC
Starting Loads                                 Maximum Loads
Grs.   Vel. (ft/s)   Pressure              Grs.   Vel. (ft/s)   Pressure
5.7     950            25,000 PSI          7.1     1,150        35,600 PSI

200 GR. HDY FMJ
Starting Loads                                 Maximum Loads
Grs.   Vel. (ft/s)   Pressure              Grs.   Vel. (ft/s)   Pressure
5.2    880             26,200 PSI          6.2     1,020        35,600 PSI

Thx

FWIIW, a picture. Case head expansion is .0020" (no reference data yet, sorry. Keep in mind it was fired in a SIG. YMMV)

Edit: forgot -- the crud around the primer is sealer. Ammo is destined to be lugged around in the woods...

[attachment deleted by admin]

A buddy of mine loves this thing, $40.

A quick heads up -- I loaded a few over 11gn of Longshot, worked well for me Casings seemed fine, I'll try to take a pic tonight.

Edit: Used new *- casings.

[attachment deleted by admin]