Thanks for your replies, I tested my rounds an they all drop in an out of my Lonewolf barrel just fine. I check with my calipers an and they read between 0.423-0.425. The BD load im using is 9.6grs with a COL of 1.255 CCI LP. Thanks again 

I recently got a glock 20 gen 3 not to long ago, an I love it! I starting reloading brand new Starline brass, with some Bluedot. I've read on forums to use the bulge buster from LEE to get bulges out of brass if you have any. On my reloaded ammo I haven't seen any glock smilies like I have seen on google searches I have done. I use a Lonewolf Stock length barrel when i shoot brand new brass reloads, I have 1x fired brass from my reloading an used the lee bulge buster just for reassurance but didn't really look like I need to. Sorry for the long talk but heres my question, I re-sized all the 1x fired brass loaded them up with 180gr Berry plated bullets with some Bluedot, not very powerful loading just plinking rounds for the range, figure not to push the 1x fired brass. After looking at the brass it seems its slightly bulge near the bottom? Was wondering if im just looking into it to much, an worrying about nothing. Down by the case head. heres a picture of my concerns? Gun im using is a Glock 20 stock w/ LoneWolf stock length barrel.

[attachment deleted by admin]