Quote from: sqlbullet on May 15 2015 07:26:14 AM MDT
Did you measure the case head expansion by chance?

I didnt, but I can measure some of my brass.  Problem is, I was running 2 loads and the spent brass is all mixed together.

Well I ran the loads through my 29 today.  Very mild recoil (for 10mm), minor case bulging which is to be expected in a stock chamber.  The loads were:

8.1 grains Ramshot Silhouette with 165 gr berry's loaded to 1.26 oal

8.1 grains ramshot silhouette with 180 gr nosler hp loaded to 1.26 oal.

Quote from: Taterhead on April 27 2015 05:00:50 PM MDT
I have used it for mild ammo with Precision Delta 180 FMJs. Nice powder. Meters well. Reasonably clean. It is not in a burn speed that I'd want to go for max effort though. I'll try to dig up my data when I get home tonight.

EDIT: Here is the data. Nothing too exciting. These are in the "FBI Load" territory. All three of these worked well. 7.5 is the start load from Ramshot. The max is 8.4 @ a 1210, although Western Powder data velocities can be a bit optimistic. That data seems unchanged from the load data that The Shadow posted.

7.5 gr 964 fps
7.7 gr 990 fps
7.9 gr 998 fps

CCI 300; 1.25"

G20 stock barrel and RSA.

Cool thanks!

Quote from: Taterhead on April 27 2015 05:00:50 PM MDT
I have used it for mild ammo with Precision Delta 180 FMJs. Nice powder. Meters well. Reasonably clean. It is not in a burn speed that I'd want to go for max effort though. I'll try to dig up my data when I get home tonight.

I just loaded some 165 gr fmjfp with 8.1 gr and 1.26 oal.  We'll see how they do!

Quote from: The_Shadow on April 27 2015 11:06:07 AM MDT
Here is the Silhouette data from Western Powders  This data has been safe at the upper levels.

Good stuff thank you.  I'm excited to start loading 10mm.  I've mostly loaded 9mm in the past.

Quote from: tommac919 on April 27 2015 09:55:07 AM MDT

Quote from: PurpleMountain on April 26 2015 09:33:34 PM MDT
Hey guys, first post here.  I'm looking to load some berry's 165 fp and nosler 180 gr into some fresh starline cases.  I just picked up some of this powder and I wanted to load some medium duty loads for my g29.  Any ideas?

Lots of info on the nets and site... First thing I recommend is getting a couple of load books for data and also check the manufacturers web site as almost all post basic load data.

Load within book values and work up proper groups with increasing powder loads ... most of the time the most accurate round isn't the on the hot end.

practice safe habits...

Thanks.  Ramshot has load data for 170 gr, but not for 165.  I believe starting is 7.9 for 170 and 8.9 max, something like that.  I figure I'm pretty safe with 165 at 8.1.

Quote from: The_Shadow on April 27 2015 09:09:06 AM MDT
Remember RamShot Silhouette is the same as the older discontinued Winchester Action Pistol, the data for both are the same.  Nice powder, good yield, clean burning, low flash, low recoil and less report.

Wow thanks for the info.  I was thinking 8.1 gr to start for the 165.  Not really sure about the 180 yet.

Thanks.

Quote from: P33v3 on April 26 2015 07:31:18 PM MDT
I just finished loading up 500 - 10mm 180 grain HSTs in front of 9.2 grains of 800x. All in all a good day.

Where did you find hst bullets for reloading?

Hey guys, first post here.  I'm looking to load some berry's 165 fp and nosler 180 gr into some fresh starline cases.  I just picked up some of this powder and I wanted to load some medium duty loads for my g29.  Any ideas?