Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - NRFJR

#1
Quote from: munchie3409 on February 18 2016 07:22:20 PM MST
When I get some time, I'm going to sort them by headstamp.  This is a bummer since we bought 2,000 pcs and most is A USA and PPU.

Live and learn...I'm hoping to get a few hundred of good brass.
For what its worth I have 100 pcs of PPU that I have loaded with 175 gr lead so many times that you can hardly read the head stamp. As for the A USA (Armscor) I have been loading the same 200 pcs with mid to full loads with 180 and 200 gr jacketed bullets and they are getting hard to read the head stamp as well, YMMV but they have been good for me. All that said I use Starline brass for full-house and self-defense loads. 
#2
What is your favorite all around bullet weight for the 10 mm. I like 180 grain
#3
Reloading 10mm ammo / 2nd best powder for 10 mm
April 06 2015 04:21:13 PM MDT
What powder is your 2nd top choice of powder for your 10 mm loads. I did not list Blue dot or Power pistol as I think they are a #1 choice of most, not all of 10 mm loaders. Thanks for voting.
#4
Quote from: bigarm on April 01 2015 09:36:59 AM MDT
Interesting on oal as my Lyman manual says 1.260.  Maybe I should check that again as I could have misread it.  At any rate, I will shorten them and try it. 

That graphic is very interesting.

Thanks
[/quoteI

If you look closely at the SAMI diagram the max is 1.260 it is just a little fuzzy I had to get the magnifying glass out and double check because all of the books I have (10 of them) have 1.260 as max COAL and I make most all of my 10 mm hand loads COAL at 1.258 so I had to check to make sure. Load safe and use what works best in your firearm.
#5
Reloading 10mm ammo / Titegroup???
February 15 2015 04:26:50 PM MST
Hello all. Has any one loaded Titegroup for the 10mm? I have not but my brother just called and told me he got 16 lbs (3 back orders all came in at once) we have all the caliber pistols that it works good in and I have seen load data at Hodgdon for the 10mm, Just looking to see if I could get some real use input. Thanks in advance.
#6
Reloading 10mm ammo / Re: Dare I say it.....Bullseye.....!
January 04 2015 04:42:49 PM MST
If you are still looking for a Bullseye load, Lyman #49 gives a 10mm auto 135gr JHP load 6.0 to 7.3 gr. of Bullseye with a oal of 1.225 at 1163 - 1335 fps. Hope this helps.