Thanks for the push into the right forum!
I'll report back later after the range.
I'll report back later after the range.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#2
Wildcats / Resizing 10mm to 9x25 Dillon
March 04 2014 09:26:05 PM MST
I'm new here, recommended by _The_Shadow (ty sir). Anyway, working up some 9x25 loads and thought I'd share....
Glock 20
Wolf 22# Spring kit w/ Steel Guide Rod
Lone Wolf Dist. M20/L 10-9x25 conversion 6" threaded barrel
800x Powder:
Nostler 124gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 11.0gr.
OAL = 1.250" (+/- .004)
1) 1702
2) 1712
3) 1690
4) 1736
5) 1696
6) --
7) 1652
1715
9) 1630
10) 1682
AVG: 1690
Nostler 124gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 11.5gr.
OAL = 1.250" (+/- .004)
1) 1739
2) 1772
3) 1722
4) 1745
5) 1755
6) 1710
7) 1793
1783
9) 1724
10) --
AVG: 1749
Nostler 124gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 12.0gr.
OAL = 1.250" (+/- .004)
1) 1832
2) 1827
3) 1860
4) 1829
5) 1765
6) 1820
7) 1818
1839
9) 1774
10) 1808
AVG: 1817
Hornady HAP 115gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 12.0gr.
OAL = 1.250" (+/- .005)
1) 1952
2) 1847
3) 1879
4) 1925
5) 1871
6) 1866
7) 1865
1915
9) 1940
10) 1910
AVG: 1897
Hornady XTP 90gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 12.0gr.
OAL = 1.250" (+/- .005)
1) 1997
2) 2004
3) 2007
4) 1957
5) 1952
6) 2005
7) 2002
1982
9) 1907
10) 1976
AVG: 1988
BlueDot powder:
Hornady XTP 90gr. JHP
CCI# 350 primers
Once-Fired brass
BlueDot @ 15.5gr. *compressed load*
OAL = 1.250" (+/- .005)
1) 2177
2) 2023
3) ---
4) 2048
5) 1971
6) 1975
7) 1996
1955
9) 1965
10 1985
AVG: 2010
I have a few (6-8) cases split like this...
A few primers fell out of their pockets prior to shooting - probably b/c they were once-fired brass, the pockets may have just gotten deformed... keep an eye on this.
On a final note.... in this video of my reliability testing, I cover an issue you all may have seen. Although the round would fire, eject, and successfully reload a new round, the Glock 20 trigger would not be reset. I had to "re-cock" it several times.
Please watch and let me know what you think....
If I failed to properly attach the video, you can find it here:
http://mydatabase.myftp.org/sniper168/9x25_Reliability_Test
Glock 20
Wolf 22# Spring kit w/ Steel Guide Rod
Lone Wolf Dist. M20/L 10-9x25 conversion 6" threaded barrel
800x Powder:
Nostler 124gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 11.0gr.
OAL = 1.250" (+/- .004)
1) 1702
2) 1712
3) 1690
4) 1736
5) 1696
6) --
7) 1652
17159) 1630
10) 1682
AVG: 1690
Nostler 124gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 11.5gr.
OAL = 1.250" (+/- .004)
1) 1739
2) 1772
3) 1722
4) 1745
5) 1755
6) 1710
7) 1793
17839) 1724
10) --
AVG: 1749
Nostler 124gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 12.0gr.
OAL = 1.250" (+/- .004)
1) 1832
2) 1827
3) 1860
4) 1829
5) 1765
6) 1820
7) 1818
18399) 1774
10) 1808
AVG: 1817
Hornady HAP 115gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 12.0gr.
OAL = 1.250" (+/- .005)
1) 1952
2) 1847
3) 1879
4) 1925
5) 1871
6) 1866
7) 1865
19159) 1940
10) 1910
AVG: 1897
Hornady XTP 90gr. JHP
CCI# 350 primers
Once-Fired brass
800x @ 12.0gr.
OAL = 1.250" (+/- .005)
1) 1997
2) 2004
3) 2007
4) 1957
5) 1952
6) 2005
7) 2002
19829) 1907
10) 1976
AVG: 1988
BlueDot powder:
Hornady XTP 90gr. JHP
CCI# 350 primers
Once-Fired brass
BlueDot @ 15.5gr. *compressed load*
OAL = 1.250" (+/- .005)
1) 2177
2) 2023
3) ---
4) 2048
5) 1971
6) 1975
7) 1996
19559) 1965
10 1985
AVG: 2010
I have a few (6-8) cases split like this...
A few primers fell out of their pockets prior to shooting - probably b/c they were once-fired brass, the pockets may have just gotten deformed... keep an eye on this.
On a final note.... in this video of my reliability testing, I cover an issue you all may have seen. Although the round would fire, eject, and successfully reload a new round, the Glock 20 trigger would not be reset. I had to "re-cock" it several times.
Please watch and let me know what you think....
If I failed to properly attach the video, you can find it here:
http://mydatabase.myftp.org/sniper168/9x25_Reliability_Test
Pages1