Yea it looks like it would just mount on there. I just wanted to completely cover the holes on top of the slide using a smaller footprint optic. A plate from my S&W M&P 2.0 10MM will fit if I shave a bit off the forward side. I may just use the sealing plate for a Trijicon RMR that has the corners cut out to allow the pegs of the optic plate to protrude and engage the forward sight base holes.

I got mine in and test fired it with F5 ammo and also shot some 10mm and 40 ammo in it and it shoots great. I'm going to put a red dot sight on and I am
wondering what plate did you use to mount the SRO on it? I'll probably put a Swampfox Justice on it but I can't find out what plate to use on it.
I ordered some S95 ammo for it too and hopefully can get some S9 for it.

Have you taken any game with the F5 load? Or the S95 load and how did they perform?
thanks,
Patrick

The only ammo I see that they have right now is the F5 or S95. I ordered the pistol from BRNO and hope it comes in soon.
I ordered the ammo from Firearms Depot since they had it in stock and BRNO said it would be 2-3 weeks out before shipping.
I'll stay on the lookout for some of the F9 ammo.

Sounds like it shoots great. The 10mm/40 is a bonus. I have 41 Mags for more power. I am curious as to how the 40 headspaces in the 10MM chamber. What ammo/bullet did you shoot the hogs with? No grizzlies in southern Louisiana but there are increased populations of black bears and of course large hogs are an infestation. I saw some pics of fired brass that showing splits in the shoulder/neck area. Probably can't get the bullets that they load in the ammo except for maybe the Sierra .308 95gr bullet.
I did buy some Underwood 115gr Extreme Hunter ammo with 1700fps velocity to test out.

How's the recoil on the PSD and what kind of groups are you getting at 50yds and 100yds? I used to own S&W's in 500 and 460, so recoil shouldn't be too bad in comparison to those.
The 500S&W required concentration shooting the 350gr-500gr bullets. The 460 wasn't bad and was about like a hot loaded 44 magnum. I also had a 41GNR#2 on an Encore which is the 445 Supermag case necked down to .41 and shot a 210gr bullet to 2200fps in an 8" barrel.
Recoil wasn't bad with it especially compared to the 500S&W.

I am looking at maybe acquiring one of these pistols and I am wondering if it is worth all the hype.
One concern I have is that it seems to shoot high at 25yds since the sights are regulated for 100yd shooting.
Also wondering about the accuracy of the pistol with the 7.5TK, 10mm, and .40 cartridges.
Probably would put a red dot on it anyways so sighting in at 25yds to 100yds wouldn't be a problem.
It's a fast round in a pistol but basically equals the power of a 30 carbine in a rifle.
Is it super great hunting round good for gophers to grizzlies?

What's the ballistics on the 30 LMK ? I was curious as to how it compares to the 7.5 FK.

I hear ya, I didn't buy the S&W M&P 2.0 10mm 4.6" for CCW. I bought it for hunting and target shooting.
I have a Glock 43X 9mm for CCW or a Glock 23 Gen3 .40 + 9mm Lone Wolf barrel for it.

I put a O-50yd all purpose night sight on it with the Swampfox Justice Red Dot and had the Fobus HK holster in the unused parts drawer just waiting to be repurposed. Bam, now I have more money for ammo and mags.
Being the frugal sort, it fits in better with my personal Mission Statement, plus leaves more money for all the handgun mouths I have to feed. My use for this pistol will be mainly outdoor pursuits and I dislike holsters that I can't hose the mud off them, lol.

I was looking for a holster option for the M&P 10mm and choices were limited due to the high sights. I had a Fobus paddle holster  for the HK USP .40 that I had
and it works fine for the M&P 10mm.

   I got the Swampfox Justice mounted on my S&W 10mm and have it sighted in at 25yds so far.  I initially started with Blazer aluminum 200gr ammo to get on paper and then the Blazer brass case 180gr ammo. Final sight in with the Hornady Custom 180gr XTP rounds for hunting. I have some Underwood 200gr XTP ammo to try out and some Sig VCrown 180gr ammo I'll try out with it after testing some Sig 180gr FMJ ammo.
   Recoil wasn't bad with Blazer ammo in the 10MM but you could sure tell the step up in power with the Hornady Custom loads. I'll try some of my Fenix ammo in it as well.

   I also sighted in my Super Redhawk 41 Mag with the iron sights and after putting a Bushnell 2-6x scope on it out to 35yds so far. I load Hornady 210gr XTP in the 41 Mag.

Did the Justice model work good on the Glock? I'm thinking about getting the Justice to put on my New M&P 10mm pistol.

Quote from: pacecars on December 16 2021 08:28:32 PM MST
Picked up the new M&P 10mm with 4 inch barrel and no safety today! Brought it home and mounted a Swampfox Liberty red dot sight on it. I installed the Med-Large grips and it felt good. It surprised me since I have rather large hands and it felt better than the large grips. Can?t wait to shoot it

How did you mount the Swampfox red dot on it. I'm thinking of doing the same thing. 7 plates came with the pistol and haven't a clue as to which one to use.

Got mine on 12-27-21. Shoots great and optics ready. I haven't shot it a lot since 10mm ammo is scarce and evaporates quickly once if finds it way to Academy shelves. I have a good supply and the dies/bullets/powder to reload it as well, just haven't yet. No jams with healthy ejection and shoots lots better than the Glock 20 I had with factory barrel. The Glock shot good with the KKM  6" barrel but this one shoots just as good if not better and I didn't have to buy another barrel for it.