10mm-Auto

Other Ammunition Calibers => Factory Ammo pull-downs => Topic started by: RDub01 on February 01 2019 10:56:34 PM MST

Title: 357 Mag Winchester 110gr JHP
Post by: RDub01 on February 01 2019 10:56:34 PM MST
(https://i.postimg.cc/fb9t5r82/DSC02714-sized.jpg) (https://postimages.org/)


Cartridge is from Ammo Manufacture:  Winchester .357 Mag

Muzzle Velocity; Advertised:   1295 fps  (No barrel length mentioned)     
Muzzle Energy; Advertised:    410 ft/lbs

(https://i.postimg.cc/GpGtvsp6/DSC02724-sized.jpg) (https://postimg.cc/VSsz8vnF)
                                               
Actual Instrumental Velocity:   
2½" barrel 66:     1185 fps  42°F
4" barrel 686:        1260 fps  42°F
5" barrel 686 plus PC:     1322 fps  43°F

(https://i.postimg.cc/XNKGWpB7/DSC02780-sized.jpg) (https://postimages.org/)


Brass Make/Headstamp:  Winchester 357 MAG
Bullet Make/Weight/Construction/Info:  Winchester 110grs JHP

(https://i.postimg.cc/v8z1P9vs/DSC02718-sized.jpg) (https://postimages.org/)

(https://i.postimg.cc/prqppbdT/DSC02721-sized.jpg) (https://postimages.org/)

(https://i.postimg.cc/2yz1k8rM/DSC02722-sized.jpg) (https://postimages.org/)

.3566" dia. 
.529" long.
Actual Weight:     109.8grs.

C.O.A.L.:    1.563"
Primer:  Winchester WSP
Case: Brass
1.282" long
79.8grs w/o primer

(https://i.postimg.cc/yY8D2dfS/DSC02720-sized.jpg) (https://postimages.org/)

Powder Description/Positive ID/Type/Charge Weight:  Flattened Ball;  8.8grs.

(https://i.postimg.cc/m2pP4sqp/DSC02716-sized.jpg) (https://postimages.org/)

(https://i.postimg.cc/vZ1cHKwY/DSC02715-sized.jpg) (https://postimages.org/)

(https://i.postimg.cc/6pDT7hBd/DSC02717-sized.jpg) (https://postimages.org/)


When shooting the 5" barrel group, there was one unusually slow round. Had that not occurred the average would have been closer to 1350 fps.

Shot another group with the 5" barrel today, 2-6.  It was colder today and the velocity reflects it.  One flyer, but tighter Sd though.

(https://i.postimg.cc/25yntp3p/5in-110gr-2-6-19.jpg) (https://postimages.org/)

Title: Re: 357 Mag Winchester 110gr JHP
Post by: The_Shadow on February 02 2019 09:34:45 AM MST
RDub I would suggest HS6 as the powder...
Title: Re: 357 Mag Winchester 110gr JHP
Post by: RDub01 on February 02 2019 11:19:11 AM MST
I don't have any HS-6 currently, but I do have some 540, which is supposed to be the same thing.
Here is the factory powder;

(https://i.postimg.cc/6pDT7hBd/DSC02717-sized.jpg) (https://postimages.org/)

Here is 540;

(https://i.postimg.cc/fbjSD6X3/540-HS6b-sized.jpg) (https://postimages.org/)

540 looks more uniform and more flattened than the factory powder..
Title: Re: 357 Mag Winchester 110gr JHP
Post by: The_Shadow on February 02 2019 02:32:11 PM MST
When I study the Hodgdon data for the 38 spl and +P using HS6 it seems to fit even though these are loaded in 357 Mag
Hodgdon shows the 38spl +P with 110 XTP using HS6 8.4 grains making 1268 fps tested in a 7.7" barrel. 
This could be very close what you might get with the factory loading using 8.8 grains of HS6.
Thanks  again for sharing!

Data for 110 grain JHP using Winchester 540 powder with 38 spl +P shown is 8.7 grains @ 1070 fps  (Winchester 2014 data)
Title: Re: 357 Mag Winchester 110gr JHP
Post by: RDub01 on February 06 2019 07:59:38 PM MST
Shot another group with the 5" gun today.  See the original post.. One flyer but the Sd is tighter.