For those that like to load LBT style WFN bullets, RCBS makes a seating plug that mates perfectly with this bullet type. Of course an RCBS seating die is required.
Here is an example of one of my cast bullets seated with Redding Comp seater with a TC seating plug. Note the fairly severe ring around the nose.
(https://i.postimg.cc/bvt3JypN/20190201-202637.jpg)
RCBS sells a seating plug for the 180 gr Gold Dot. Find it on Midway.
(https://i.postimg.cc/ZRzjvG5P/20190201_202815.jpg)
I chucked it in a drill and used some 2000 grit sand paper to polish the edges. 1-2 minute job.
(https://i.postimg.cc/7ZcKwGvW/20190201_202748.jpg)
Fits perfectly with my LBT cast bullets (shown below). Also fits Beartooth 200 gr WFNGC bullets the same. No more goofy rings around the nose!
(https://i.postimg.cc/RF1d7gWk/20190201_202919.jpg)
THANK YOU!
Very helpful info for sure!
I have also modified many a seater stem, using something to abade the surface and then JB WELD/ sand to alter shape.
CW