Print Page - A few MV from factory 10mm

Title: A few MV from factory 10mm
Post by: sw70 on January 03 2019 03:30:34 PM MST

Finally got my MagnetoSpeed V3 set up to use on my pistol. It is a relatively new EAA Witness P Match Pro w/ 4.78" barrel.
First load is my handload using a Nosler 170 gr. HP and 10.7 gr. of Blue Dot.
Avg. 1,324fps

Second is Factory Sig 180 gr. FMJ
Avg. 1,201fps

Third is Factory Double Tap 180 gr. FMJ "Match"
Avg. 1,079fps

Fourth Hornady Custom 180 gr.XTP
Avg. 1,259fps
Strange thing about this one is the box lists MV at 1,180fps, though it doesn't list a barrel length on it either.

These are averages over 10 rounds. FYI, if your contemplating using your MagnetoSpeed you'll want to set the sensitivity to "4", or it will sometimes fail to pick up the shot, especially on the slower rounds. Hope some of you might find this helpful, or at least interesting.

Title: Re: A few MV from factory 10mm
Post by: The_Shadow on January 03 2019 08:05:20 PM MST

Thanks for your range data report, looks great! :D

Title: Re: A few MV from factory 10mm
Post by: 4949shooter on January 05 2019 07:15:23 AM MST

That is really moving for the Hornady round. I hope they are all loaded like that.

Title: Re: A few MV from factory 10mm
Post by: Overkill338 on January 23 2019 10:56:32 AM MST

The new 180 XTP is rated at 1275 and the 155 is 1410

10mm-Auto

10mm Ammuntion => Factory 10mm ammo => Topic started by: sw70 on January 03 2019 03:30:34 PM MST