Print Page - Dillon 9x25 Chamber reamer

Title: Dillon 9x25 Chamber reamer
Post by: k24j on February 07 2013 08:17:14 AM MST

I am looking for a 9x25 chamber reamer. Buy rent or find a qualified gunsmith that has one. I have been shooting 9x25 for over 15 years and after at least 50000 rounds the barrel needs replaced.

Title: Re: Dillon 9x25 Chamber reamer
Post by: sqlbullet on February 07 2013 08:33:58 AM MST

Sorry I don't have a phone number:

Van Schneider
1329 First St
Sandusky, OH 44870

Van has a reamer and has done good work for folks before.

Title: Re: Dillon 9x25 Chamber reamer
Post by: The_Shadow on February 07 2013 09:17:31 PM MST

Van Schneider
New address
The Gunworks
534 Scott Street Sandusky, OH 44870
(419) 626-3034

Mr. Van did a final reaming on my 9x25 barrel, excelent service!

Title: Re: Dillon 9x25 Chamber reamer
Post by: sqlbullet on February 08 2013 07:27:49 AM MST

Thanks Shadow. I will update my records.

Title: Re: Dillon 9x25 Chamber reamer
Post by: Yondering on February 08 2013 01:01:30 PM MST

You can also check with 4-D Reamer Rentals, and Shawnee Tools (Elk Ridge). I've used both with no complaints.

4-D is always the first place I look for reamer rentals, they are good people.

Title: Re: Dillon 9x25 Chamber reamer
Post by: Dakotared on May 09 2013 06:38:21 PM MDT

I would like to get 9x25 for my witness. Would I just get a 38 super and ream it or a 9mm barrel?

Title: Re: Dillon 9x25 Chamber reamer
Post by: The_Shadow on May 09 2013 07:04:47 PM MDT

Dakotred, most use the 38Super barrel and have it reamed to the 9x25 chamber. Just make sure the barrel is fitted to the slide and frame before the chamber reaming is done.

10mm-Auto

General => Gunsmithing => Topic started by: k24j on February 07 2013 08:17:14 AM MST