I've got a couple of boxes of these to play around with but can't find any published data for Longshot and 165gr . Lots of 40s&w loads (hottest has been 9.3 gr) so I'm wondering if this is a good place to start?
I'll be using stock G-20 and a 1095 carbine, I use Blue Dot/800x and CFE Pistol in10mm for loadings so any help would be welcomed.
Yardbird, the 180 grain loading Max is shown as 9.5 grains @ 1287 fps... Some have gone higher but they run extra strength recoil springs.
Plenty load data here http://10mm-firearms.com/reloading-10mm-ammo/10mm-load-data-collection/ (http://10mm-firearms.com/reloading-10mm-ammo/10mm-load-data-collection/)
Quote from: The_Shadow on April 21 2018 11:19:44 AM MDT
Yardbird, the 180 grain loading Max is shown as 9.5 grains @ 1287 fps... Some have gone higher but they run extra strength recoil springs.
Plenty load data here http://10mm-firearms.com/reloading-10mm-ammo/10mm-load-data-collection/ (http://10mm-firearms.com/reloading-10mm-ammo/10mm-load-data-collection/)
I guess I should clarify that it will be testing in the Hi-Point 1095 carbine only, kind of looking for start/max for 10mm. The load data you have is outstanding thanks.
You could also study Kwesi's experience with the High Point here http://10mm-firearms.com/10mm-rifles/hi-point-1095ts-range-review/msg74349/#msg74349 (http://10mm-firearms.com/10mm-rifles/hi-point-1095ts-range-review/msg74349/#msg74349)