10mm-Auto

General => Range reports => Topic started by: Mark Ouellette on November 22 2017 05:01:44 PM MST

Title: Video: 10mm 1911 500 Yard Consecutive Hits on Target
Post by: Mark Ouellette on November 22 2017 05:01:44 PM MST
First post here.  I think this 10mm forum will enjoy seeing the videos of a custom 1911 in 10mm hitting 300 and 500 yard silhouette targets consecutively:

500 Yard
https://www.facebook.com/Accuracy-X-Inc-344730025561939/

300 Yard
https://www.facebook.com/pg/Accuracy-X-Inc-344730025561939/videos/?ref=page_internal

Here's the particulars on the pistol and ammo used for the 300 and 500 yard demonstrations:

Pistol- Accuracy X PRO PLUS Series™ 1911 Longslide
Barrel- Accuracy X, Inc. 6 inch Match Barrel
Caliber- 10mm
Powder- LongShot
Charge Weight- 9.5 gr.
Bullet- 180 gr. JHP Nosler Sporting Projectile
Case- Starline
Primer- F150M
Seated 1.245
FPS- 1300+

While I couldn't begin to build a 1911, I did load the ammo. The load data is maximum listed load on the Hodgdon website; http://www.hodgdonreloading.com/data/pistol

Every charge was weighed on an RCBS Chargemaster.
There was some variation in bullets by a couple tenths of a grain. I could of and probably should have sorted for only those at exactly 180 grains. Same for the brass.  Nevertheless, the load shot well.
Title: Re: Video: 10mm 1911 500 Yard Consecutive Hits on Target
Post by: johnholliday on November 22 2017 07:18:38 PM MST
Well done!


Sent from my iPhone using Tapatalk
Title: Re: Video: 10mm 1911 500 Yard Consecutive Hits on Target
Post by: cigarman454 on January 01 2018 03:20:13 PM MST
That was awesome.
Thanks for sharing
Title: Re: Video: 10mm 1911 500 Yard Consecutive Hits on Target
Post by: Bud White on January 01 2018 04:08:53 PM MST
Thats some awesome shooting id love to try that range of shooting
Title: Re: Video: 10mm 1911 500 Yard Consecutive Hits on Target
Post by: steelcityfishanddive on January 03 2018 06:11:54 AM MST
That's throwing it out there alright.
Title: Re: Video: 10mm 1911 500 Yard Consecutive Hits on Target
Post by: Ramjet on January 03 2018 12:23:23 PM MST
awesome