Text only | Text with Images

10mm-Auto

General => General Discussion => Topic started by: 10-7 leo on September 12 2017 06:39:04 PM MDT

Title: Underwood Xtreme Penetrators from a 1006, chamber support question
Post by: 10-7 leo on September 12 2017 06:39:04 PM MDT
Would you be comfortable shooting Underwood Xtreme Penetrators with the chamber support this barrel has? I'm concerned with the area at the top of the feed ramp. I am not concerned with reloading the brass, if the rounds need to be fired. Thanks!

(https://s6.postimg.org/fw4vsgvc1/52695459545_5_F73078_A-26_DA-4_A58-_B1_C6-48_ABA143_D9_B.jpg)

(https://s6.postimg.org/r9rf3o5up/52695466765_E3_BDB69_F-9_DAB-4_D7_A-9_F43-_B06_C9038570.jpg)
Title: Re: Underwood Xtreme Penetrators from a 1006, chamber support question
Post by: The_Shadow on September 12 2017 09:16:29 PM MDT
The 1006 should handle those just fine.  I use the 22 lbs spring in mine.  Good luck to you!
Title: Re: Underwood Xtreme Penetrators from a 1006, chamber support question
Post by: will965 on September 23 2017 10:04:39 AM MDT
Shoot them all the time out of my glock 40
Text only | Text with Images