....but it was such a pain in the butt to disassemble my 1911 and mount it in the Mechtech, that I decided to give ANOTHER brand carbine a try, this time with a dedicated lower. So I went to Gunbroker and bid on a TNW ASR Kryptek Red in 10mm. It uses Glock magazines so I will get to also fit a few more rounds in. It also disassembles like a survival rifle so I can fit it in small spaces.
(http://pics.gunbroker.com/GB/686439000/686439214/pix055890650.jpg)
(http://pics.gunbroker.com/GB/686439000/686439214/pix917683600.jpg)
cool! what are you going to put on for sights?
Probably go with a Red Dot.
Very interesting. I am looking forward to a head to head review. Since you are thinking red dot ... I'm gonna request 25 yard rested group comparison.
I had to look it up and confirmed that it is a blowback action like the Mechtech. But, as a Survival rifle, it shows clear advantage. I really like the multicaliber kits - it seems that you can swap pistol calibers as easily as swapping barrel, boltface and magazines, and this is a clear advantage. I have can run 45 and 10 from two mechtech tubes and sorta plan to get a 9mm to round out the collection to be prepared to handle available ammo. This TNW ASR kit would certainly pack easier than a trio of Mechtechs - the shallow side of this advantage is that it is one PCC instead of 3 (I dedicated a lower, but I can assemble all three simultaneously using 1911s in my collection.
Grandog ... I do have an additional request. Tell me about the trigger ... the Mechtech advantages the amazing triggers in my 1911s which will be difficult to match.
Quote from: dred on August 26 2017 07:49:39 AM MDT
Very interesting. I am looking forward to a head to head review. Since you are thinking red dot ... I'm gonna request 25 yard rested group comparison.
I had to look it up and confirmed that it is a blowback action like the Mechtech. But, as a Survival rifle, it shows clear advantage. I really like the multicaliber kits - it seems that you can swap pistol calibers as easily as swapping barrel, boltface and magazines, and this is a clear advantage. I have can run 45 and 10 from two mechtech tubes and sorta plan to get a 9mm to round out the collection to be prepared to handle available ammo. This TNW ASR kit would certainly pack easier than a trio of Mechtechs - the shallow side of this advantage is that it is one PCC instead of 3 (I dedicated a lower, but I can assemble all three simultaneously using 1911s in my collection.
Grandog ... I do have an additional request. Tell me about the trigger ... the Mechtech advantages the amazing triggers in my 1911s which will be difficult to match.
They actually sell multi-caliber kits, where you get like three barrels. Not really sure what they do for magazines though.
10-7 leo
Are you talking the Mechtech here or the Aero? Because I am not sure which due to your comparing the carbine to the pistol. There is no pistol with the Aero.
Got it. Just ordered 5 more mags from CDNN. Was surprised how cheap the mags were, $18 a pop. Guess they hold 15, so if I stick one in the pipe, should have 16 shots per.
(https://preview.ibb.co/dFr4XQ/GEDC0043.jpg)
I have four Glock mags with the Kriss mag extension on them. 33 rounds each.
Hey GD
Look into these Arredendo +5 Mag Bases for the Glock 20 Mags
They make the Factory 15s into 20 Round Mags
I run them in my MG20
http://www.brownells.com/magazines/handgun-magazines/magazine-parts/magazine-extension/extended-base-pad-for-glock-prod71363.aspx?avs%7cManufacturer_1=ARREDONDO
Finally had a week of no doctor appointments, and no rain. So I finally finally got my new TNW to the range. It feels a lot like my Mechtech, but I don't have to swap mags so much. Pic of my first shots walking the PIA of the red dot down to where I wanted it.
(https://preview.ibb.co/d2nNw5/GEDC0054.jpg)
Quote from: gandog56 on September 22 2017 04:51:41 PM MDT
Finally had a week of no doctor appointments, and no rain. So I finally finally got my new TNW to the range. It feels a lot like my Mechtech, but I don't have to swap mags so much. Pic of my first shots walking the PIA of the red dot down to where I wanted it.
(https://preview.ibb.co/d2nNw5/GEDC0054.jpg)
Think I have a keeper.
Looking good, I may have to look into one of those someday.... 8)
I've had my Mec-Tech for almost a year now. Over 1,000rds with no malfunctions! I've shot Underwood, Buffalo Bore, Double Tap, Armscor, S&B, Federal, all functioned fine and shot tight groups. The only thing lacking was a high cap mag. So I bought 2 Korean made 26rd, Glock 21 mags (.45acp) and converted them to 10mm. These mags now hold 30rds and have been 100% reliable! So now I have have a 30rd 10mm carbine.
(http://i291.photobucket.com/albums/ll301/gdonley308/IMG_4214_2.jpg) (http://s291.photobucket.com/user/gdonley308/media/IMG_4214_2.jpg.html)
(http://i291.photobucket.com/albums/ll301/gdonley308/IMG_4211.jpg) (http://s291.photobucket.com/user/gdonley308/media/IMG_4211.jpg.html)
(http://i291.photobucket.com/albums/ll301/gdonley308/IMG_4228.jpg) (http://s291.photobucket.com/user/gdonley308/media/IMG_4228.jpg.html)
(http://i291.photobucket.com/albums/ll301/gdonley308/IMG_4225.jpg) (http://s291.photobucket.com/user/gdonley308/media/IMG_4225.jpg.html)
(http://i291.photobucket.com/albums/ll301/gdonley308/IMG_4223.jpg) (http://s291.photobucket.com/user/gdonley308/media/IMG_4223.jpg.html)
(http://i291.photobucket.com/albums/ll301/gdonley308/IMG_3010.jpg) (http://s291.photobucket.com/user/gdonley308/media/IMG_3010.jpg.html)
(http://i291.photobucket.com/albums/ll301/gdonley308/IMG_2991_2.jpg) (http://s291.photobucket.com/user/gdonley308/media/IMG_2991_2.jpg.html)
(http://i291.photobucket.com/albums/ll301/gdonley308/IMG_2990_1.jpg) (http://s291.photobucket.com/user/gdonley308/media/IMG_2990_1.jpg.html)