Text only | Text with Images

10mm-Auto

General => Gunsmithing => Topic started by: The Earl o Sammich on December 28 2016 08:04:29 PM MST

Title: Thinking About Sending My Delta Elite Out For a Supported Chamber
Post by: The Earl o Sammich on December 28 2016 08:04:29 PM MST
Any smith recommendations???  Might want to get a 6 inch barrel fitted up at the same time.

TIA.
Title: Re: Thinking About Sending My Delta Elite Out For a Supported Chamber
Post by: RK1911 on January 16 2017 06:06:13 PM MST
Business End Customs did one on a Delta Elite using a Wilson barrel..
Title: Re: Thinking About Sending My Delta Elite Out For a Supported Chamber
Post by: sliclee on March 10 2017 02:28:02 PM MST
Earl- which is it, which model delta elite do you have or just want the 6 inch slide.
I have a DE is in my opinion as supported as any other offensive handgun.
I consider myself lucky with My 10 mm COLT, is perfect out of the box, IMO.
I do roll my own lately as store bought ammo appears to be light on powder. I didn't buy a 10mm to shoot a .380 load.
Text only | Text with Images