Text only | Text with Images

10mm-Auto

Firearms => 10mm semi-auto handguns => Topic started by: hollywood63 on August 07 2016 04:36:07 PM MDT

Title: Witness P Carry 10mm
Post by: hollywood63 on August 07 2016 04:36:07 PM MDT
I bought a new witness in 10mm with a 3.8 barrel so far like my other witness's its great.  My only issue is its going to cost a fortune to shoot.  The think launchs the empty cases 25-30 feet  and I lost 20 cases so far.  Whats the trick to calming this thing do so it doesn't throw the cases so far.
Title: Re: Witness P Carry 10mm
Post by: Intercooler on August 07 2016 06:05:31 PM MDT
Spring it and cut the ejector down.
Title: Re: Witness P Carry 10mm
Post by: PCFlorida on August 07 2016 06:28:27 PM MDT
Do you think that would work on my Sig 10mm too? It is a beast with the empties.
Title: Re: Witness P Carry 10mm
Post by: hollywood63 on August 07 2016 06:30:35 PM MDT
Are you referring to recoil springs? What is involved with cutting the ejector?

Thanks
Title: Re: Witness P Carry 10mm
Post by: Intercooler on August 08 2016 07:23:08 AM MDT
Recoil spring and some change to a stronger hammer spring. I have a write-up in the Gunsmithing section on cutting the ejector down. It's best performed with a Dremel.
Text only | Text with Images