Print Page - CFE powder and cast bullets

Title: CFE powder and cast bullets
Post by: Diabloken on October 05 2015 11:00:33 PM MDT

I tried 180 gr with 7grains with good results... Anyone else using this powder?

Title: Re: CFE powder and cast bullets
Post by: The_Shadow on October 06 2015 07:38:33 AM MDT

It does show good results, even though I hadn't tested it much. It exceeded the velocity shown when I used a book load with the 135 JHP. ;D

Title: CFE powder and cast bullets
Post by: sstewart on October 06 2015 10:09:04 AM MDT

Quote from: Diabloken on October 05 2015 11:00:33 PM MDT
I tried 180 gr with 7grains with good results... Anyone else using this powder?

Is this with Lubbed or unlubed bullets? I have had trouble with Smoking on some lubed ones I purchased in the past with Titegroup or HS6

Title: Re: CFE powder and cast bullets
Post by: Benchrst on October 06 2015 11:48:34 PM MDT

I've only tried it behind my cast / coated 147gr - 8.4gr yielded 1,295 out of a G20 w/ LW 5.15".

Title: Re: CFE powder and cast bullets
Post by: my_old_glock on October 09 2015 01:27:44 PM MDT

Quote from: Diabloken on October 05 2015 11:00:33 PM MDT
I tried 180 gr with 7grains with good results... Anyone else using this powder?

What caliber? 180 could be 10mm, 40S&W, 45ACP, 41mag, 44mag/spl, 357 mag.

I have used it a few times with 9mm and 45ACP. Preliminary results show it works. I have not yet done extensive tests for accuracy.

10mm-Auto

10mm Ammuntion => Reloading 10mm ammo => Topic started by: Diabloken on October 05 2015 11:00:33 PM MDT