Found a nice load for the 40 S&W this weekend. Gun used was a H&K USP40. I used Alliant's website to work up to these max loads listed and they performed well. They also ran great through a Glock 27 Gen4.
BE-86 6.3 grains, WSP, Hornady 180 grain HAP, O.A.L. = 1.12"
H&K USP40 (10 shot measurement)
Grains: 180
Hi Vel: 1049
Low Vel: 1023
Ave Vel: 1037
Ext Spread:26
Std Dev: 8
Glock 27 (5 shot measurement)
Grains: 180
Hi Vel: 983
Low Vel: 962
Ave Vel: 974
Ext Spread:21
Std Dev: 8
BE-86 6.6 grains, WSP, X-Treme 180 grain RNFP HPCB, O.A.L. = 1.12"
H&K USP40 (10 shot measurement)
Grains: 180
Hi Vel: 1049
Low Vel: 1022
Ave Vel: 1033
Ext Spread:27
Std Dev: 8
Glock 27 (5 shot measurement)
Grains: 180
Hi Vel: 969
Low Vel: 938
Ave Vel: 953
Ext Spread:31
Std Dev: 11
Charges were dropped with a RCBS Uniflow and every 5th one verified on a scale.
[attachment deleted by admin]
what kind of load for 165grfn with bullseye???
Grimreaper, you keep asking about 165 grain FN bullets are these for 10mm? 40S&W?