Text only | Text with Images

10mm-Auto

10mm Ammuntion => Reloading 10mm ammo => Topic started by: wrladner on April 12 2015 10:03:06 PM MDT

Title: 10mm 185 gr. coated ( ACME ) load data
Post by: wrladner on April 12 2015 10:03:06 PM MDT
Does anyone have load data for 180 gr. coated ( ACME ) lead bullets ?
Title: Re: 10mm 185 gr. coated ( ACME ) load data
Post by: Taterhead on April 12 2015 11:11:43 PM MDT
I can look in my Lyman manual. For what powder are you interested?
Title: Re: 10mm 185 gr. coated ( ACME ) load data
Post by: gandog56 on April 13 2015 06:10:18 AM MDT
I shoot 185 grain Precision Bullets coated bullets. I just use mid 180 grain recipes.
Title: Re: 10mm 185 gr. coated ( ACME ) load data
Post by: sean on May 10 2015 11:41:34 AM MDT
How they doing for ya boss? I have some and used 8.7gr 800x and 9.0gr of power pistol for some accurate loads.i run a g20sf with storm lake barrel. ..I noticed off the bat that they are really long,at least the acme 180gr lng I bought was..same as a xtp in length. .took me a min to dial in my lee classic turret..very accurate though..I like the one for luck they sent and the wood box is classy..
Title: Re: 10mm 185 gr. coated ( ACME ) load data
Post by: The_Shadow on May 10 2015 12:18:36 PM MDT
Most 180 gr data should work well at or below the maximums.  If you had a specific powder that you are wanting to work with it would be easier to nail a recipe down.  Slower burning powders are more forgiving than the uber faster powders when at the upper end.
Title: Re: 10mm 185 gr. coated ( ACME ) load data
Post by: gandog56 on May 10 2015 05:46:33 PM MDT
Quote from: sean on May 10 2015 11:41:34 AM MDT
How they doing for ya boss?

You tell me.... ;)

(http://img.photobucket.com/albums/v196/Gandog56/dwgroup.jpg)
Text only | Text with Images