Really would like to hear the feedback.
Thanks,
Pat
Magnum loads? Do you mean the 10mm "Magnum" round?
http://www.doubletapammo.net/index.php?route=product/category&path=125_395
Those aren't for a 10mm Auto.
Yea I think he is referring to the 10MM Magnum cartridges...there are very few guns that were chambered for the round IAI and the T/C barrels and some that were converted like the S&W 610. I think Mike McNett actually did have the T/C barrel for testing.
Pat,
To be clear, the 10mm Magnum is not merely hot loaded 10mm Auto rounds. It is a different cartridge. The brass for the 10mm magnum is .25" longer than a 10mm auto case, similar to the difference between a 38 special and 357 magnum.
In fact, the best comparison would be 38 Special, 357 magnum and 357 maximum to 40 S&W, 10mm auto and 10mm Magnum.
I don't know if anyone here has a 10mm magnum AND has tried the double tap loads.
Seems like 475/480 (a member here) had access to a 10mm magnum. I don't recall what loads he tried though.
Here is the thread. Don't see any reports on factory ammo.
http://10mm-firearms.com/10mm-revolvers/10mm-magnum/15/
Thanks for clarifying.
If there is a way, Intercooler will try them! ;)
I did not use any factory loads . I went to John Taffins site and started with his data on the 10MM Magnum.
I did take a little 1x4 whitetail buck with it at 22 yards , 180gr XTP at 1350 fps.
Sean
Quote from: sqlbullet on October 08 2014 02:56:10 AM MDT
Seems like 475/480 (a member here) had access to a 10mm magnum. I don't recall what loads he tried though.
Here is the thread. Don't see any reports on factory ammo.
http://10mm-firearms.com/10mm-revolvers/10mm-magnum/15/
Quote from: 4949shooter on October 09 2014 04:41:06 PM MDT
If there is a way, Intercooler will try them! ;)
You are probably right! I have "The Gloves" ;D