(https://scontent-b-iad.xx.fbcdn.net/hphotos-ash4/t1.0-9/10013830_671856582852377_1967968221_n.jpg)
(https://scontent-b-iad.xx.fbcdn.net/hphotos-prn1/t1.0-9/1012944_671856329519069_429585611_n.jpg)
Those Black Talons are a pretty ammo!
I'm posting about my early mishap in the range report section. Thanks to the member here sending these to me for testing! I saved you a squib and broken pistol ;D
I did get a squib in the Hunter. Unfortunately, that ended the 6" testing for the day as the bullet is still lodged in it!
EAA Limited Pro 4.75" 1504, 1514, 1482. Average = 1500 FPS/ 750 LBS
EAA Hunter 6" 1630, 1683. Average = 1656.5 FPS/ 914 LBS
The third shot in the 6" Hunter was the squib and no data. Thankfully, it was the last in the magazine and it was an odd noise too.
I received the Black Talons today and fired a couple in the only functioning 10mm there :D
EAA Limited Pro 4.75" 987, 986. Average = 986.5 FPS/ 432 LBS
Raggedyman registered 915 FPS out of his Witness 4.5".
Glad you're okay! :o
Me too! Things worked out because it was the last round, I knew the noise and stopped. If I would have sent one down the tube with another lodged :o
I tried to change the heading. These are Sierra and not Nosler I believe.
The heading did change...some of the post did not. you could change them individually I guess.
The cuts on the bullet doesn't look like the typical Noslers:
(http://i1086.photobucket.com/albums/j441/_The_Shadow/IMG_0830_zps3fa8f752.jpg)
I think these are Sierra.
I fired off 13 of the 150gr from the same box as the ones I sent you on Sunday through my G20 with 0 problems. Maybe that particular round was bad?
I made it through five just fine until that one. My plan is to call Kevin today to see what to do with the remainder.
Ran these out of the Hunter 6" today:
- Underwood 150gr Nosler JHP EAA Hunter 6" 1643, 1646, 1664. Average = 1651 FPS/ 908 LBS
- Winchester Black Talon 200gr JHP EAA Hunter 6" 1025, 1027. Average = 1026 FPS/ 468 LBS