10mm-Auto

10mm Ammuntion => Factory 10mm ammo => Topic started by: mag360 on March 17 2014 12:56:50 AM MDT

Title: differences between nugent defender and hunter 10mm?
Post by: mag360 on March 17 2014 12:56:50 AM MDT
Are the differences just the velocity? or is one using sealed primers/case mouths and flash supressed powder and the other isn't? just looking for the scoop on these two loads.
Title: Re: differences between nugent defender and hunter 10mm?
Post by: Intercooler on March 17 2014 05:33:57 PM MDT
Which weight?
Title: Re: differences between nugent defender and hunter 10mm?
Post by: mag360 on March 17 2014 07:23:05 PM MDT
180gr
Title: Re: differences between nugent defender and hunter 10mm?
Post by: Rojo27 on March 17 2014 07:54:52 PM MDT
There have been previous posts on this topic found on this forum.  Relaying information I've seen here: 
10mm Hunter has been out longer and folks here have chrono'd it @ 1230's feet per sec.  10mm Defender is newer and some folks here say it's a little hotter @ 1270's feet per sec.

Nugent/Pierce Defender says 1235 feet per sec on box.
Nugent/Pierce Hunter says 1238 feet per sec on box.

Couldn't decide so I bought some of both (same price) gunbot.net

External examination... I cant see a difference.
Title: Re: differences between nugent defender and hunter 10mm?
Post by: Dave84 on March 18 2014 11:53:13 PM MDT
Quote from: Rojo27 on March 17 2014 07:54:52 PM MDT
There have been previous posts on this topic found on this forum.  Relaying information I've seen here: 
10mm Hunter has been out longer and folks here have chrono'd it @ 1230's feet per sec.  10mm Defender is newer and some folks here say it's a little hotter @ 1270's feet per sec.

Nugent/Pierce Defender says 1235 feet per sec on box.
Nugent/Pierce Hunter says 1238 feet per sec on box.

Couldn't decide so I bought some of both (same price) gunbot.net

External examination... I cant see a difference.


What'd that run you? I've been curious about that ammo but can never get a decent deal on it.
Title: Re: differences between nugent defender and hunter 10mm?
Post by: Rojo27 on March 19 2014 06:50:07 PM MDT


[/quote]

What'd that run you? I've been curious about that ammo but can never get a decent deal on it.
[/quote]


Best deal I found was $17.95 for box of 20 (Hunter & Defender) at Rare Ammo out of S. Louisiana.  http://www.rareammo.com/catalog/product/351e09fb97704e5eaee9d8b482404853
I found them on gunbot.net
Shipping was reasonable as well... $8.95 for ground delivery of 2 boxes (think I picked up couple other calibers to fill out order too).  Shot a few and liked them, so I ordered two more boxes.

Unfortunately $.90 a round (before shipping) for a 180 grain, full power round constitutes a pretty good deal  ??? but it's far and away best deal for good factory JHP using a Speer bullet I've found in 2 or 3 months.
Title: Re: differences between nugent defender and hunter 10mm?
Post by: gandog56 on March 20 2014 06:46:55 AM MDT
Quote from: Rojo27 on March 17 2014 07:54:52 PM MDT
There have been previous posts on this topic found on this forum.  Relaying information I've seen here: 
10mm Hunter has been out longer and folks here have chrono'd it @ 1230's feet per sec.  10mm Defender is newer and some folks here say it's a little hotter @ 1270's feet per sec.

Nugent/Pierce Defender says 1235 feet per sec on box.
Nugent/Pierce Hunter says 1238 feet per sec on box.

Couldn't decide so I bought some of both (same price) gunbot.net

External examination... I cant see a difference.

One difference. The Ted Nugent brass is headstamped Ted Nugent!  :P