Print Page - 10 mm 155gr. SWC load

Title: 10 mm 155gr. SWC load
Post by: gradyboy on February 12 2014 07:22:01 AM MST

Hi,
Anyone have a reliable COL for the 10mm 155 SWC lead load. Also good target load for the same bullet, thanks.

Gradyboy

Title: Re: 10 mm 155gr. SWC load
Post by: The_Shadow on February 12 2014 08:31:06 AM MST

Most all of the 10mm guns and bullets are good to go at 1.2500"-1.2600", however, with hollow points and the WFN cast bullets, I have seen them loaded shorter down to 1.2420" for better functioning reliability.

You didn't mention what powder you had to work with...these days just finding specific powders to work with may be the decision maker. ???

Powders like Power Pistol, AA#7 & #9 meter very well, there are many others that can be use for 10mm in the target performance, so narrowing it down helps.

Title: Re: 10 mm 155gr. SWC load
Post by: Marc on February 13 2014 08:20:11 AM MST

Whatever works in your gun. With 155 gr you have plenty of case capacity for seating depth experimentation. Just begin with a starting load and incrementally work your way up, as always.

10mm-Auto

10mm Ammuntion => Reloading 10mm ammo => Topic started by: gradyboy on February 12 2014 07:22:01 AM MST