I know there are a lot of folks here that have used the UpLULA Magazine Loader
They are GREAT for loading Mags fron 9mm thru 45acp
BUT what about those Mags smaller than 9mm ?
Yeah, MagLULA makes a few other Loaders, Like the BabyUpLULA or the new 22UpLULA
What if you want just one Loader that will load just about any Mag you'll have in your Bag
Well, I buy the stock UpLULAs then mod them to handle just about anything
22 thru 45, Single and Double Stack
The UpLula-K (Kadet) or in our case, the UpLula-W (Witness)
Here's a Vid I made showing the UpLula-W in action:
http://www.youtube.com/watch?v=jSulEl7tHEc
Also, here a Video a Friend made showing him load a 10 Round Kadet Mag in about 11 seconds:
http://joelynch.smugmug.com/Firearms/CZ-75B-2013/27351048_Xw7WqQ#!i=2653403113&k=C6DSXnB&lb=1&s=A
Try doing that by hand ! ! ! :o
Will this work with Ruger Mark I, II, or II mags?
Quote from: Bozz10mm on September 23 2013 10:41:46 AM MDT
Will this work with Ruger Mark I, II, or II mags?
Sorry I didn't get back to you sooner
Yes, it will load the Ruger Mk Series, BUT it takes a lot of practice to keep those thin Mags centered in the Loader
They offer an Alignment Tool, the 1911-A1 that snaps into the bottom and it does help a lot
If you just want a Mag Loader for the Ruger Mki, ii AND III, I do mod the HKS-22R so it WILL load all three types
BUT, if you want one Loader that will load just about any Mag you'll have in your Bag, the UpLula-K with the 1911-A1 Adaptor will do just that
Hope this helps
I was asked by a Member for a bit more info on the UpLULA Mod for 22 Mags
Here is a link to the PicTutorial on modding the UpLULA Mag Loader for 22 and most all other Magazines 22 - 45, Singl and Double Stack:
http://www.czfirearms.us/index.php?topic=24310.0
Don't hesitate to give me a call if you have questions or would like an MSWord.doc copy of the Tutorial