10mm-Auto

Miscellaneous Firearms => Wildcats => Topic started by: Intercooler on August 14 2013 04:43:22 PM MDT

Title: It looks like Parabellum Research may dabble in 9x25
Post by: Intercooler on August 14 2013 04:43:22 PM MDT
   Anthony spoke today of load development. Anyone have some good recipes I can pass along?

Title: Re: It looks like Parabellum Research may dabble in 9x25
Post by: The_Shadow on August 14 2013 08:08:08 PM MDT
Here are the pull-downs of the DT products I purchased...while they were short on velocity from the 5" tube of my 1006, they would probably live up to the clained velocity for the 6" barrels

DT 90gr Speer Gold Dot Hollow Point
Box 2100 fps/6" bbl
C.O.A.L. 1.250"
Powder Charge Weight 12.2 grains LongShot
1940 – 1855 fps from Bar-Sto Barrel from S&W 1006

DT 115 gr Speer Gold Dot Hollow Point
Box 1800 fps/6" bbl
C.O.A.L. 1.250"
Powder Charge Weight 10.6 grains LongShot
1575 – 1610 fps Bar-Sto Barrel from S&W 1006

DT 125 gr Speer Gold Dot Hollow Point
Box 1695 fps/6" bbl
C.O.A.L. 1.250"
Powder Charge Weight 10.0 grains LongShot
1525 – 1475 fps Bar-Sto Barrel from S&W 1006

I have loaded with Blue Dot & Power Pistol which was good to go as well.
ZERO 121.0 gr JHP
Dia. 0.356"
CCI 350 primer
COAL 1.255"

Blue Dot   12.2 gr CCI 350   Velocity 1405-1438 fps  Bar-Sto Barrel from S&W 1006 5"
Power Pistol   10.2 gr CCI 350   Velocity 1592-1620 fps  Bar-Sto Barrel from S&W 1006 5"

I need to test these from the 6" LWD barrel in the G-20SF
Title: Re: It looks like Parabellum Research may dabble in 9x25
Post by: Intercooler on August 15 2013 08:43:51 AM MDT
I sent those to him. Let's see what sticks! Show of support always helps.