Text only | Text with Images

10mm-Auto

10mm Ammuntion => Factory 10mm ammo => Topic started by: Intercooler on July 31 2013 05:49:57 AM MDT

Title: ProGrade and BVAC 165/180'S. PBR 135/155's
Post by: Intercooler on July 31 2013 05:49:57 AM MDT
  These should be making their way back by the time I get there for testing.

It will be interesting seeing what The Shadow gets from the pull-downs. I'm pretty sure BVAC/ProGrade/USA/Freedom Munitions are made all at the same place!
Title: Re: ProGrade and BVAC 165/180'S. PBR 135/155's
Post by: The_Shadow on July 31 2013 09:12:03 AM MDT
Looking forward to doing them... 8)
Title: Re: ProGrade and BVAC 165/180'S. PBR 135/155's
Post by: Intercooler on August 05 2013 03:51:41 PM MDT
The Selway rounds will be here Wednesday and tested Saturday. Don't know where the PBR stuff is at the moment  :o
Title: Re: ProGrade and BVAC 165/180'S. PBR 135/155's
Post by: Intercooler on August 07 2013 05:49:52 PM MDT
Received the first set today and tested:

(https://sphotos-a-iad.xx.fbcdn.net/hphotos-ash4/998770_570713159633387_454266519_n.jpg)
(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-frc1/1005793_570713312966705_2126127956_n.jpg)
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-frc3/972115_570713442966692_1259445965_n.jpg)
(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/14460_570713652966671_661974381_n.jpg)

   BVAC is using JAG brass and Prograde has their headstamp (my bet is JAG). All the primers and loading looked like they were from one place... BVAC! The results were not all the same though!

Title: Re: ProGrade and BVAC 165/180'S. PBR 135/155's
Post by: Intercooler on August 07 2013 06:10:09 PM MDT

Limited Pro 4.75" Prograde 165gr FMJ 1128, 1126, 1134, 1134, 1126. Average = 1129.6 FPS/ 468 LBS
Limited Pro 4.75" Prograde 180gr FMJ 1004, 1004, 1004, 983, 970. Average = 993 FPS/ 394 LBS
Limited Pro 4.75" BVAC 165gr FMJ 1130, 1128, 1094, 1107, 1102. Average = 1112.2 FPS/ 453 LBS
Limited Pro 4.75" BVAC 180gr FMJ 1198, 1201, 1187, 1200, 1205, 1202. Average = 1198.83 FPS/ 575 LBS

    The Prograde stuff isn't loaded any better than a PPU. The BVAC 180's woke me up pretty good and would be an outstanding practice load. Strong but not gun battering!


   I think The Shadow's pull-downs will show us these are all different levels of BVAC loads.
Title: Re: ProGrade and BVAC 165/180'S. PBR 135/155's
Post by: pacapcop on August 07 2013 08:41:34 PM MDT
Thank you for the test and your time.
Title: Re: ProGrade and BVAC 165/180'S. PBR 135/155's
Post by: Intercooler on August 08 2013 04:10:15 AM MDT
    No problem. It's something I like to do!
Title: Re: ProGrade and BVAC 165/180'S. PBR 135/155's
Post by: DAVIDF on August 08 2013 06:55:51 AM MDT
Intercooler,

How was the accuracy with the BVAC? Was the 180gr once fired brass?

Thanks for the testing!
Title: Re: ProGrade and BVAC 165/180'S. PBR 135/155's
Post by: Intercooler on August 08 2013 07:18:22 AM MDT
Decent accuracy in new brass.
Title: Re: ProGrade and BVAC 165/180'S. PBR 135/155's
Post by: txgunshowreview on August 08 2013 12:27:39 PM MDT
I've shot a few hundred 10mm distributed by AmmoKan, which is nothing more than the BVAC 180 in qty. 250 or more in a plastic ammo can.  Nice warm practice load.  Shoots and feeds well in my Gen-4 G20.
Title: Re: ProGrade and BVAC 165/180'S. PBR 135/155's
Post by: pacapcop on August 08 2013 01:02:28 PM MDT
How would the numbers show coming out of the 1006 in in BVAC 180's? Armscor has those #'s in a Glock 20 from Dave Sneeds testing. His #'s were 1092,1176,1203,1094 and 1181. Intercooler i can send you some Armscor to see if they are consistant with BVAC out of the Match.
Title: Re: ProGrade and BVAC 165/180'S. PBR 135/155's
Post by: Intercooler on August 08 2013 01:46:36 PM MDT
When I used the 1006 and Match the numbers were about equal +/- 10 FPS.
Text only | Text with Images